Installing in-walls

[King]

I have my walls pre-wired for in-walls and I wanted to install my speakers I
have mostly in-walls and a couple in-ceiling speakers I have never done
this before and was wondering if anybody has any tips on installing them....

[ReEfErMaDnEsS]

take your time and leave a little room for fit....at least and 1/8 of an
inch....many people also like them to protrude form the wall a 1/4
inch....but that's just a thought



"King" > wrote in message
. cable.rogers.com...
> I have my walls pre-wired for in-walls and I wanted to install my speakers
I
> have mostly in-walls and a couple in-ceiling speakers I have never done
> this before and was wondering if anybody has any tips on installing
them....
>
>
>
>

[King]

Thanks..... I guess there aren't many people who have installed
inwalls.....

"ReEfErMaDnEsS" > wrote in message
news:5JR2c.135602$Xp.582477@attbi_s54...
> take your time and leave a little room for fit....at least and 1/8 of an
> inch....many people also like them to protrude form the wall a 1/4
> inch....but that's just a thought
>
>
>
> "King" > wrote in message
> . cable.rogers.com...
> > I have my walls pre-wired for in-walls and I wanted to install my
speakers
> I
> > have mostly in-walls and a couple in-ceiling speakers I have never done
> > this before and was wondering if anybody has any tips on installing
> them....
> >
> >
> >
> >
>
>

[ReEfErMaDnEsS]

or not many posters who have, I just got done doing my brother in laws place
with in wall's from Phoenix gold a 6.1 setup....they sound very
good,,,are a bi-polar design and he got a pretty good deal on them. I liked
them best protruding from the wall 1/4 in that flush. this also makes the
finishing of the wall easier as far as the sheet rock goes


"King" > wrote in message
able.rogers.com...
> Thanks..... I guess there aren't many people who have installed
> inwalls.....
>
> "ReEfErMaDnEsS" > wrote in message
> news:5JR2c.135602$Xp.582477@attbi_s54...
> > take your time and leave a little room for fit....at least and 1/8 of an
> > inch....many people also like them to protrude form the wall a 1/4
> > inch....but that's just a thought
> >
> >
> >
> > "King" > wrote in message
> > . cable.rogers.com...
> > > I have my walls pre-wired for in-walls and I wanted to install my
> speakers
> > I
> > > have mostly in-walls and a couple in-ceiling speakers I have never
done
> > > this before and was wondering if anybody has any tips on installing
> > them....
> > >
> > >
> > >
> > >
> >
> >
>
>

[King]

What about insulation in behind the speaker???

"ReEfErMaDnEsS" > wrote in message
news:dBu3c.223884$uV3.897095@attbi_s51...
> or not many posters who have, I just got done doing my brother in laws
place
> with in wall's from Phoenix gold a 6.1 setup....they sound very
> good,,,are a bi-polar design and he got a pretty good deal on them. I
liked
> them best protruding from the wall 1/4 in that flush. this also makes the
> finishing of the wall easier as far as the sheet rock goes
>
>
> "King" > wrote in message
> able.rogers.com...
> > Thanks..... I guess there aren't many people who have installed
> > inwalls.....
> >
> > "ReEfErMaDnEsS" > wrote in message
> > news:5JR2c.135602$Xp.582477@attbi_s54...
> > > take your time and leave a little room for fit....at least and 1/8 of
an
> > > inch....many people also like them to protrude form the wall a 1/4
> > > inch....but that's just a thought
> > >
> > >
> > >
> > > "King" > wrote in message
> > > . cable.rogers.com...
> > > > I have my walls pre-wired for in-walls and I wanted to install my
> > speakers
> > > I
> > > > have mostly in-walls and a couple in-ceiling speakers I have never
> done
> > > > this before and was wondering if anybody has any tips on installing
> > > them....
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[ReEfErMaDnEsS]

depends on the depth of the wall, his outside walls were only 2x4 so depth
became an issue, we ended up using very thick plastic and just lining the
wall with it. As far a sound insulation, the speakers themselves had a
liner for that


"King" > wrote in message
able.rogers.com...
> What about insulation in behind the speaker???
>
> "ReEfErMaDnEsS" > wrote in message
> news:dBu3c.223884$uV3.897095@attbi_s51...
> > or not many posters who have, I just got done doing my brother in laws
> place
> > with in wall's from Phoenix gold a 6.1 setup....they sound very
> > good,,,are a bi-polar design and he got a pretty good deal on them. I
> liked
> > them best protruding from the wall 1/4 in that flush. this also makes
the
> > finishing of the wall easier as far as the sheet rock goes
> >
> >
> > "King" > wrote in message
> > able.rogers.com...
> > > Thanks..... I guess there aren't many people who have installed
> > > inwalls.....
> > >
> > > "ReEfErMaDnEsS" > wrote in message
> > > news:5JR2c.135602$Xp.582477@attbi_s54...
> > > > take your time and leave a little room for fit....at least and 1/8
of
> an
> > > > inch....many people also like them to protrude form the wall a 1/4
> > > > inch....but that's just a thought
> > > >
> > > >
> > > >
> > > > "King" > wrote in message
> > > >
. cable.rogers.com...
> > > > > I have my walls pre-wired for in-walls and I wanted to install my
> > > speakers
> > > > I
> > > > > have mostly in-walls and a couple in-ceiling speakers I have
never
> > done
> > > > > this before and was wondering if anybody has any tips on
installing
> > > > them....
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > >
> > >
> >
> >
>
>

[Dale Farmer]

King wrote:

> Thanks..... I guess there aren't many people who have installed
> inwalls.....

Mostly I've installed in-ceilings. In drop ceilings, so it's easy to take
the tile down and work on it on the floor.

--Dale

[King]

Thanks for your help..

"King" > wrote in message
. cable.rogers.com...
> I have my walls pre-wired for in-walls and I wanted to install my speakers
I
> have mostly in-walls and a couple in-ceiling speakers I have never done
> this before and was wondering if anybody has any tips on installing
them....
>
>
>
>