FREQ and Q-CURVE???

[Flashovr29]

I have a Clarion DZX545MP and under the bass and treble controls there
are a few options that I have no idea what they mean, and when I
adjust them I can't hear a difference. I have good speakers for highs
and subs too.

TREBLE:

FREQ---->8kHz or 12kHZ? (factory default is 12)

BASS

FREQ---->50Hz or 80Hz or 120Hz (factory default is 50)
Q Curve----->1 or 1.25 or 1.5 or 2 (factory default is 1)

What should I set them up as? Or should I just leave as defaults? I
try to listen carefully but still can't really tell...MAYBE I can
hear the bass get tighter?

THANKS!

[[email protected]]

Try LPF or HPF. YOu hear quite different. Gain control isn't make that
different.

[[email protected]]

>I have a Clarion DZX545MP and under the bass and treble controls there

>are a few options that I have no idea what they mean, and when I
>adjust them I can't hear a difference. I have good speakers for highs

>and subs too.


>TREBLE:


>FREQ---->8kHz or 12kHZ? (factory default is 12)


>BASS


>FREQ---->50Hz or 80Hz or 120Hz (factory default is 50)
>Q Curve----->1 or 1.25 or 1.5 or 2 (factory default is 1)


>What should I set them up as? Or should I just leave as defaults? I
>try to listen carefully but still can't really tell...MAYBE I can
>hear the bass get tighter?


>THANKS!

Your HU is boosting the amplitude at those specific frequencies. The Q
is the center frequency of the boosted bandwidth(s).The lower the value
of 'Q', the smaller the bandwidth of these boosted freqs. It is pretty
much like having an adjustable "loud" button.