merc
April 26th 04, 09:10 PM
I decided to reinstall my old MB Quart QM218.03 components but... I've
forgotten what goes where on the crossovers, and can't find the install
instructions.
This set includes a pair of 19nx tweets, and a pair of QM160tx 6.5 midwoofs.
The crossovers are the musicomp QM160/130.03 crossovers. The jumpers are
already set for -3dB tweeter attenuation and for standard(not biwire)
wiring. The connections on the crossovers are:
W-
W+
160+
130+
INH-
INH+
INL-
INL+
Where do I hook up my + and - amp power connections; my tweeter's + and -
connections; and my woofer's (QM160) + and - connections.
I realize that these are very basic questions, but I am getting old(and my
memory is going), so please help me without ridicule. :)
BTW, I did search MBQ's site and googled for this info but can find nothing
on these old component speakers.
Thank you for your help!
forgotten what goes where on the crossovers, and can't find the install
instructions.
This set includes a pair of 19nx tweets, and a pair of QM160tx 6.5 midwoofs.
The crossovers are the musicomp QM160/130.03 crossovers. The jumpers are
already set for -3dB tweeter attenuation and for standard(not biwire)
wiring. The connections on the crossovers are:
W-
W+
160+
130+
INH-
INH+
INL-
INL+
Where do I hook up my + and - amp power connections; my tweeter's + and -
connections; and my woofer's (QM160) + and - connections.
I realize that these are very basic questions, but I am getting old(and my
memory is going), so please help me without ridicule. :)
BTW, I did search MBQ's site and googled for this info but can find nothing
on these old component speakers.
Thank you for your help!