Dual 1215 Tonearm Adjustment

[MusicMan]

Just purchased a Dual 1215 and got everything to work, but when using in the changer mode for multiple records, the tonearm raises too high and hits the remaining records on the spindle when moving to play the first record. I have owners manual and tried adjusting the variable cueing adjustment, but that didn't seem to work for the auto tonearm movement. Does any one know how to adjust tonearm height for the changer's auto tonearm movement? Thanks.

[Mark D. Zacharias]

I'm sure this isn't quite the response you were hoping for, but I would
mention that back in the day, stacking records was frowned upon as damaging
to the records, and indicative of a "less than hi-fi" method of playing
them.

Don't know how to fix this - I've worked on Duals before and never seen an
adjustment for this. The cueing is pushed up by a large lever with a wide
flat spot at the tonearm end. All this is driven by the main cam - no
adjustment on the ones I've seen.

Mark Z.


"MusicMan" > wrote in message
...
>
> Just purchased a Dual 1215 and got everything to work, but when using in
> the changer mode for multiple records, the tonearm raises too high and
> hits the remaining records on the spindle when moving to play the first
> record. I have owners manual and tried adjusting the variable cueing
> adjustment, but that didn't seem to work for the auto tonearm movement.
> Does any one know how to adjust tonearm height for the changer's auto
> tonearm movement? Thanks.
>
>
> --
> MusicMan