Will this amp blow this sub?

[James Pritchard]

I've got an Xtant 202m amp and have been advised to bridge it and pair
it up to a JL Audio 10W0 sub.

Bridged the amp specs are 1x200w @ 4ohms

The Sub spec is: Continuous Power Handling: 125 Watts

I assume the amp power is peak 200w, so the sub should be able to
handle it. Is this right, or am I going to blow my sub over time?

I'd rather just get something that can't be blown if I'm risking it
(any suggestions?).

It's going in a convertible Mustang so I was going to put it in a
ported box, although I've had no luck finding one (that's not already
got a sub in it, that is).

This setup http://www.ssan.com/cgi-bin/links/jump2.cgi?ID=529267
ABASS10 Single 10? PORTED BASS enclosure seems like it would do
everything I need without buying seperate components, but I hear
Audiobahn is cheap crap (true?) so maybe I should just get the JL sub
and buy a box seperately.

Thanks in advance, James

[FogHornLegHorn]

the 10w0 will be fine.

FHLH


"James Pritchard" > wrote in message
m...
> I've got an Xtant 202m amp and have been advised to bridge it and pair
> it up to a JL Audio 10W0 sub.
>
> Bridged the amp specs are 1x200w @ 4ohms
>
> The Sub spec is: Continuous Power Handling: 125 Watts
>
> I assume the amp power is peak 200w, so the sub should be able to
> handle it. Is this right, or am I going to blow my sub over time?
>
> I'd rather just get something that can't be blown if I'm risking it
> (any suggestions?).
>
> It's going in a convertible Mustang so I was going to put it in a
> ported box, although I've had no luck finding one (that's not already
> got a sub in it, that is).
>
> This setup http://www.ssan.com/cgi-bin/links/jump2.cgi?ID=529267
> ABASS10 Single 10? PORTED BASS enclosure seems like it would do
> everything I need without buying seperate components, but I hear
> Audiobahn is cheap crap (true?) so maybe I should just get the JL sub
> and buy a box seperately.
>
> Thanks in advance, James