View Full Version : setting lpf on jbl 600.1
jbl 600.1
August 20th 03, 09:21 PM
where should it be, at 32hz or 320 hz.. or somewhere in between.
I got an indash adjustable crossover. and im running it to an infinity
perfect 10.1 in a sealed box
Sanitarium
August 20th 03, 09:49 PM
Depends on what kind of music you listem to, and how adequate your
midbasses are. If your midbasses are well designed, installed
adequately and can handle the lower mid-bass tones, then by all means
cross the subs over at a lower point and let the midbasses handle the
upper sub bass frequencies.
If you are into 50-s sock hop and classic rock, theres not much sub bass
so a higher x-over point may be to your liking. My pioneer head has a
mono sub x-over and I toggle between 80 and 50Hz. I usually prefer the
50Hz setting, it allows my midbasses to hit the kick-drum tones.
You have to listen and experiment a little to find out what sounds best
to your ears. given your current system capabilities.
Garrett
"jbl 600.1" wrote:
>
> where should it be, at 32hz or 320 hz.. or somewhere in between.
> I got an indash adjustable crossover. and im running it to an infinity
> perfect 10.1 in a sealed box
jbl 600.1
August 20th 03, 09:55 PM
So i should use my Indash crossover and the one on the amp at the same time?
"Sanitarium" > wrote in message
...
> Depends on what kind of music you listem to, and how adequate your
> midbasses are. If your midbasses are well designed, installed
> adequately and can handle the lower mid-bass tones, then by all means
> cross the subs over at a lower point and let the midbasses handle the
> upper sub bass frequencies.
>
> If you are into 50-s sock hop and classic rock, theres not much sub bass
> so a higher x-over point may be to your liking. My pioneer head has a
> mono sub x-over and I toggle between 80 and 50Hz. I usually prefer the
> 50Hz setting, it allows my midbasses to hit the kick-drum tones.
>
> You have to listen and experiment a little to find out what sounds best
> to your ears. given your current system capabilities.
>
> Garrett
>
> "jbl 600.1" wrote:
> >
> > where should it be, at 32hz or 320 hz.. or somewhere in between.
> > I got an indash adjustable crossover. and im running it to an infinity
> > perfect 10.1 in a sealed box
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.