operating DELCO radio on the work bench

[YaronBar]

how can I operate a Delco radio on my bench in order to repair them
does any one can help with this?

[Hamilton Audio]

pretty simple dude....but I'm worried that you're going to repair them, but
you don't know how to run one on the workbench?!?!

find a wiring harness for the particular model (the male harness), and
simply wire the contstant and ignition leads to the positive side of a
decent power supply. connect the ground to the ground lead and
voila...working on the bench.

I'll let you figure out that you have to wire the speakers separately with +
and - on each :)

Hamilton Audio
Car Audio, Security and Performance

"YaronBar" > wrote in message
om...
> how can I operate a Delco radio on my bench in order to repair them
> does any one can help with this?

[Masterson]

He's most likely talking about Class Two Data bus radios.






"Hamilton Audio" > wrote in message
. ca...
> pretty simple dude....but I'm worried that you're going to repair them,
but
> you don't know how to run one on the workbench?!?!
>
> find a wiring harness for the particular model (the male harness), and
> simply wire the contstant and ignition leads to the positive side of a
> decent power supply. connect the ground to the ground lead and
> voila...working on the bench.
>
> I'll let you figure out that you have to wire the speakers separately with
+
> and - on each :)
>
> Hamilton Audio
> Car Audio, Security and Performance
>
> "YaronBar" > wrote in message
> om...
> > how can I operate a Delco radio on my bench in order to repair them
> > does any one can help with this?
>
>

[Jeff]

I certainly hope so.
Jeff

"Masterson" > wrote in message
...
> He's most likely talking about Class Two Data bus radios.
>
>
>
>
>
>
> "Hamilton Audio" > wrote in message
> . ca...
> > pretty simple dude....but I'm worried that you're going to repair them,
> but
> > you don't know how to run one on the workbench?!?!
> >
> > find a wiring harness for the particular model (the male harness), and
> > simply wire the contstant and ignition leads to the positive side of a
> > decent power supply. connect the ground to the ground lead and
> > voila...working on the bench.
> >
> > I'll let you figure out that you have to wire the speakers separately
with
> +
> > and - on each :)
> >
> > Hamilton Audio
> > Car Audio, Security and Performance
> >
> > "YaronBar" > wrote in message
> > om...
> > > how can I operate a Delco radio on my bench in order to repair them
> > > does any one can help with this?
> >
> >
>
>