shaft mount radio locking nuts

[bcjm]

I have an old ('70) Volvo shaft mount radio I am trying to install in
the dash board. The nuts that secure the shafts on to the dash are
missing. I can't find it ANYWHERE!!! These hex nuts are much flatter
than the regular nuts. They used to be everywhere when the shaft
mount radios were still populate. I think they are standard size for
anything shaft mount radio but I am not sure. If anyone has some or
can point me to a source I would appreciated.

Thanks
Bob

[sl2perfect]

sears hardware
--
sl2perfect
------------------------------------------------------------------------
CarAudioForum.com - Usenet Gateway w/over one million posts online!
View this thread: http://www.caraudioforum.com/vbb2/showthread.php?threadid=153345

[Masterson]

Is the radio your trying to install a family airloom?
That would be the only reason to keep it.





"bcjm" > wrote in message
om...
> I have an old ('70) Volvo shaft mount radio I am trying to install in
> the dash board. The nuts that secure the shafts on to the dash are
> missing. I can't find it ANYWHERE!!! These hex nuts are much flatter
> than the regular nuts. They used to be everywhere when the shaft
> mount radios were still populate. I think they are standard size for
> anything shaft mount radio but I am not sure. If anyone has some or
> can point me to a source I would appreciated.
>
> Thanks
> Bob

[The Lizard]

sl2perfect wrote:
> sears hardware

Quote, numbnuts.

--
Lizard

[sl2perfect]

The Lizard wrote:
>
> Quote, numbnuts.
>
> --
> Lizard
> [/B]

F#ck you.
--
sl2perfect
------------------------------------------------------------------------
CarAudioForum.com - Usenet Gateway w/over one million posts online!
View this thread: http://www.caraudioforum.com/vbb2/showthread.php?threadid=153345

[bcjm]

This is a Volvo p1800 classic car. I would like to keep the dash
original. I really hate to cut the opening if I don't have to.

"Masterson" > wrote in message >...
> Is the radio your trying to install a family airloom?
> That would be the only reason to keep it.
>
>
>
>
>
> "bcjm" > wrote in message
> om...
> > I have an old ('70) Volvo shaft mount radio I am trying to install in
> > the dash board. The nuts that secure the shafts on to the dash are
> > missing. I can't find it ANYWHERE!!! These hex nuts are much flatter
> > than the regular nuts. They used to be everywhere when the shaft
> > mount radios were still populate. I think they are standard size for
> > anything shaft mount radio but I am not sure. If anyone has some or
> > can point me to a source I would appreciated.
> >
> > Thanks
> > Bob

[Jack in Dallas]

if radio shack dont have em, try the junkyard should be millions of them
there. i too am a volvo driver, u have any pics of that 1800 ?
Jack in Dallas