Need SCHEMATIC for Kustom 200

[OvrReactor]

I have a Kustom 200 on the bench with problems in the reverb/tremolo channel.
I'd rather not dig into this thing until I've review a schematic first. Does
anyone have one to share???

PLEASE RESPOND BY EMAIL to >.

Regards,
Tom Mitchell
website 1 - http://members.aol.com/ecc81
website 2 - http://www.over-reactors.com

[Darrell Klein]

Try here:

http://www.vintagekustom.com/frame.html

(OvrReactor) wrote in message >...
> I have a Kustom 200 on the bench with problems in the reverb/tremolo channel.
> I'd rather not dig into this thing until I've review a schematic first. Does
> anyone have one to share???
>
> PLEASE RESPOND BY EMAIL to >.
>
> Regards,
> Tom Mitchell
> website 1 - http://members.aol.com/ecc81
> website 2 - http://www.over-reactors.com

[Frank Vuotto]

Every Kustom I've worked on had a schematic glued to the inside of the
metal chasis cover.

Frank /~ http://newmex.com/f10
@/


>> I have a Kustom 200 on the bench with problems in the reverb/tremolo channel.
>> I'd rather not dig into this thing until I've review a schematic first. Does
>> anyone have one to share???
>>
>

[Tim Padrick]

Just pull the channel's transistors and caps and look for leaky ones.


"OvrReactor" > wrote in message
...
> I have a Kustom 200 on the bench with problems in the reverb/tremolo
channel.
> I'd rather not dig into this thing until I've review a schematic first.
Does
> anyone have one to share???
>
> PLEASE RESPOND BY EMAIL to >.
>
> Regards,
> Tom Mitchell
> website 1 - http://members.aol.com/ecc81
> website 2 - http://www.over-reactors.com

[Leoaw3]

>> PLEASE RESPOND BY EMAIL to

Growl. This is a pet peeve of mine. If its of general interest enough to post
-- have the courtesy to check the newsgroup for your answer!

-lee-

[Mike Rivers]

In article > writes:

> >> PLEASE RESPOND BY EMAIL to
>
> Growl. This is a pet peeve of mine. If its of general interest enough to post
> -- have the courtesy to check the newsgroup for your answer!

For this sort of request, I really don't mind when someone asks for an
e-mail response. I'm not really interested in who has a copy of this
schematic. If there's another person who wants a copy, he could post a
"me too" message.

What does annoy me is when someone asks for a "reveiew" of a product
that might be of general interest and is likely to promote some
meaningful (and sometimes meaningless) discussion, and says "I don't
check the newsgroup so please e-mail me directly."



--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me here: double-m-eleven-double-zero at yahoo

[Roger W. Norman]

Yeah, but half the time you have to edit the fricking email address just to
get it to them. Ain't worth the effort! <g>

--


Roger W. Norman
SirMusic Studio

"Mike Rivers" > wrote in message
news:znr1079124358k@trad...
>
> In article >
writes:
>
> > >> PLEASE RESPOND BY EMAIL to
> >
> > Growl. This is a pet peeve of mine. If its of general interest enough
to post
> > -- have the courtesy to check the newsgroup for your answer!
>
> For this sort of request, I really don't mind when someone asks for an
> e-mail response. I'm not really interested in who has a copy of this
> schematic. If there's another person who wants a copy, he could post a
> "me too" message.
>
> What does annoy me is when someone asks for a "reveiew" of a product
> that might be of general interest and is likely to promote some
> meaningful (and sometimes meaningless) discussion, and says "I don't
> check the newsgroup so please e-mail me directly."
>
>
>
> --
> I'm really Mike Rivers )
> However, until the spam goes away or Hell freezes over,
> lots of IP addresses are blocked from this system. If
> you e-mail me and it bounces, use your secret decoder ring
> and reach me here: double-m-eleven-double-zero at yahoo