P&G fader help

[dave]

hey folks, I'm looking to source some 10K P&G faders, looking to replace
model number "1120/D/120" ideally with the same ones. Does anyone have any
for sale or know of a good resource to locate used P&G's? The console Im
working on is being very particular about the fader load and I specifically
need to replace it with a 10K fader, tried a 5K and no luck...

please reply via email if you can help-

thanks!

dave

[Scott Dorsey]

dave > wrote:
>hey folks, I'm looking to source some 10K P&G faders, looking to replace
>model number "1120/D/120" ideally with the same ones. Does anyone have any
>for sale or know of a good resource to locate used P&G's? The console Im
>working on is being very particular about the fader load and I specifically
>need to replace it with a 10K fader, tried a 5K and no luck...

Why do you need to replace the whole fader? If the element is bad, you
can just order that from P&G. The nice thing about the P&G faders is that
although they are expensive, replacement parts are available at reasonable
cost and they are not hard to rebuild.

Make sure you get the same taper, too.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."