John
November 22nd 03, 04:41 PM
I recently put two ADAT expansion cards into my DM-24 and attempted to
record into an HD24 using the new expansion cards. Although I am able
to configure the board to record off of the internal ADAT interface
properly, each time I attempt to reconfigure the board through one of
the expansion cards, all I get is static/noise into the HD24 to the
point of clipping. How do I get rid of the noise? My setup is
summarized below.
OUTPUT
Slot 1 Buss 1-8/Direct 1-8
Slot 2 Buss 1-8/Direct 9-16
Internal Stereo
CHAN 1-16
INPUT: M/L
RETURN: ----
CHAN 17-32
INPUT: ---- ----
RETURN: SLOT1:1-8 SLOT2:9-16
DIGITAL
SLOT1: 1-8
SLOT2: 9-16
-John
record into an HD24 using the new expansion cards. Although I am able
to configure the board to record off of the internal ADAT interface
properly, each time I attempt to reconfigure the board through one of
the expansion cards, all I get is static/noise into the HD24 to the
point of clipping. How do I get rid of the noise? My setup is
summarized below.
OUTPUT
Slot 1 Buss 1-8/Direct 1-8
Slot 2 Buss 1-8/Direct 9-16
Internal Stereo
CHAN 1-16
INPUT: M/L
RETURN: ----
CHAN 17-32
INPUT: ---- ----
RETURN: SLOT1:1-8 SLOT2:9-16
DIGITAL
SLOT1: 1-8
SLOT2: 9-16
-John