2mb
November 21st 03, 07:48 AM
Try using an ASIO driver for your sound card. Direct X sound card drivers
are not the best way to go. Check out www.cubase.net for Cubase questions.
"Zooper" > wrote in message
...
> Hi all,
>
> I'm a late convert from Logic to Cubase SX, but I can't get the dang thing
> to work properly!
>
> For example, if I record a single track and play it back, the location
> indicator starts moving, but no audio is heard for about 3 seconds. Then,
> when the audio *does* start playing, it's obvious that what I am hearing
is
> ahead of the waveform under the indicator. Then whilst I let it keep
playing
> back, the indicator starts jumping to seemingly catch re-sync or
something.
> It's all choppy and very f@#ked up.... Even if I generate a click on
> playback it jumps too!!!
>
> I never had this problem with Logic, using the exact same hardware. If I
was
> playing back a 48-track 24-bit song in Logic and decided to
instantaneously
> relocate the indicator to another part of the song with a mouse click, in
a
> matter of milliseconds logic would be in sync and cruising!
>
> What the heck is going on?!? Please offer any advice on how to set up
Cubase
> SX. I'm sure I've done something wrong coz I can't imagine Steinberg would
> release software that was so laggy!!
>
> My hardware (which works fine with Logic):
> 80GB 7200rpm Raid array dedicated to Audio
> 2GHz P4 with 500MB ram
> RME Hamerfall DSP card
> RME ADI-8DS Converters
>
> cheers,
>
> Zooper
>
>
are not the best way to go. Check out www.cubase.net for Cubase questions.
"Zooper" > wrote in message
...
> Hi all,
>
> I'm a late convert from Logic to Cubase SX, but I can't get the dang thing
> to work properly!
>
> For example, if I record a single track and play it back, the location
> indicator starts moving, but no audio is heard for about 3 seconds. Then,
> when the audio *does* start playing, it's obvious that what I am hearing
is
> ahead of the waveform under the indicator. Then whilst I let it keep
playing
> back, the indicator starts jumping to seemingly catch re-sync or
something.
> It's all choppy and very f@#ked up.... Even if I generate a click on
> playback it jumps too!!!
>
> I never had this problem with Logic, using the exact same hardware. If I
was
> playing back a 48-track 24-bit song in Logic and decided to
instantaneously
> relocate the indicator to another part of the song with a mouse click, in
a
> matter of milliseconds logic would be in sync and cruising!
>
> What the heck is going on?!? Please offer any advice on how to set up
Cubase
> SX. I'm sure I've done something wrong coz I can't imagine Steinberg would
> release software that was so laggy!!
>
> My hardware (which works fine with Logic):
> 80GB 7200rpm Raid array dedicated to Audio
> 2GHz P4 with 500MB ram
> RME Hamerfall DSP card
> RME ADI-8DS Converters
>
> cheers,
>
> Zooper
>
>