Mike Nowlen
November 15th 03, 08:20 PM
HEWLETT - PACKARD 209A Sine/Square Oscillator, 4 Hz to 2 MHz
Picture at: http://mywebpages.comcast.net/mnowlen/hp209a.htm
Description:
The HP 209A is a small, lightweight, solid-state sine/square
Oscillator. Stable, accurate signals which can be synchronized with an
external source are instantly available over a frequency range from 4
Hz to 2 MHz.Separate adjustable sine/square outputs are located on the
front-panel.* Distortion and flatness can be minimized at low
frequencies by a rear-panel Low Distortion Mode switch. Sine wave
output of 5* (600 Ohms); square wave output of 20 V (p-p) into 600
Ohms.
Specifications:
Frequency Range:** 4 Hz to 2 MHz
Number of Ranges: 6 Overlapping
Dial Accuracy:* +/-3%
Flatness:* +/- 1% or better
Sine Wave Output Voltage:* >5 Volts RMS into 600 ohms
Square Wave Output Voltage:* >20 P-P Volts into 600 ohms
Attenuator:* Continuously variable, greater than 40dB range
Distortion:* <0.1%* 30 Hz to 100 kHz* (Measures Less than 0.05% at
1kKz)
Hum and Noise Voltage:* <0.01% of output
Synchronization Output:* Can be synchronized to an external signal.
Synchronization Output:* Sine wave in phase with output; fixed level,
100mV into 10 Kohms, 100pF
Input Voltage: 115 or 230 VAC
Power Consumption:* 7 VA
Net Weight:* 6 lbs (2.7kg)
Shipping Wt.:* 8 lbs (3.6 kg)
Dimensions:* 6.1 x.5.1 x 8
Condition: Very Good, with copy of Operating and Service Manual and
detachable power cord:
$150
Plus Actual Shipping and Insurance, No Packing or other charges. Send
Zip code for shipping charges.
7 day right to return inspection period. 30 Day repair or replace
Warrenty.
Please email
Thanks for looking
Mike Nowlen
Picture at: http://mywebpages.comcast.net/mnowlen/hp209a.htm
Description:
The HP 209A is a small, lightweight, solid-state sine/square
Oscillator. Stable, accurate signals which can be synchronized with an
external source are instantly available over a frequency range from 4
Hz to 2 MHz.Separate adjustable sine/square outputs are located on the
front-panel.* Distortion and flatness can be minimized at low
frequencies by a rear-panel Low Distortion Mode switch. Sine wave
output of 5* (600 Ohms); square wave output of 20 V (p-p) into 600
Ohms.
Specifications:
Frequency Range:** 4 Hz to 2 MHz
Number of Ranges: 6 Overlapping
Dial Accuracy:* +/-3%
Flatness:* +/- 1% or better
Sine Wave Output Voltage:* >5 Volts RMS into 600 ohms
Square Wave Output Voltage:* >20 P-P Volts into 600 ohms
Attenuator:* Continuously variable, greater than 40dB range
Distortion:* <0.1%* 30 Hz to 100 kHz* (Measures Less than 0.05% at
1kKz)
Hum and Noise Voltage:* <0.01% of output
Synchronization Output:* Can be synchronized to an external signal.
Synchronization Output:* Sine wave in phase with output; fixed level,
100mV into 10 Kohms, 100pF
Input Voltage: 115 or 230 VAC
Power Consumption:* 7 VA
Net Weight:* 6 lbs (2.7kg)
Shipping Wt.:* 8 lbs (3.6 kg)
Dimensions:* 6.1 x.5.1 x 8
Condition: Very Good, with copy of Operating and Service Manual and
detachable power cord:
$150
Plus Actual Shipping and Insurance, No Packing or other charges. Send
Zip code for shipping charges.
7 day right to return inspection period. 30 Day repair or replace
Warrenty.
Please email
Thanks for looking
Mike Nowlen