PDA

View Full Version : FS: MS16 / RAMSA WR-T820B


Kenny
September 15th 03, 04:56 AM
Just thought I would send one more email concerning this fantastic recorder
/ mixer combo.
This 1 inch 16 track has a very special sound quality.

ADD IN RECYCLER for "PICKUP ONLY" in LA AREA...
http://www.recycler.com/asp/AdDetails.asp?iID=14849&sBAC=562&bSQ=0

The combo was originally $16k would sell both for $3500.
Plus, manuals and extender card.
Patchbay available to connect them together if needed.
I have 4 new rolls of 1 inch tape too.

Does anyone want a TENTOMETER? tension meter?

I would like to keep them but, just don't have the space...
If you are thinking about an Analog setup this is the one.
for a lot of reasons, Low Hours, upgraded chips.

Let me know if you are interested.

Kenny Lee
www.watch777.com

Kenny
September 15th 03, 06:46 AM
Hello,
see listing on ebay... unit works great!
Thanks,
Kenny

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=2558601970&ssPageName=ADME:B:LC:US:1

Kenny
September 15th 03, 06:50 AM
MRL 1 inch 30 IPS.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=15199&item=2558601442

I did not run my MS16 at 30ips but have the calibration tape just in case.

LeBaron & Alrich
September 15th 03, 03:44 PM
Wouldn't hurt to spell it correctly. Nobobdy searching for what it is
will find it under "tetel".

--
ha

Kenny
September 16th 03, 01:16 AM
new location:

http://www.recycler.com/asp/AdDetails.asp?iID=14772&sBAC=562&bSQ=0

Don Cooper
September 16th 03, 08:22 PM
Kenny wrote:

> This 1 inch 16 track has a very special sound quality.


: )



Don