Re: How to make insert and mini-stereo cables

[Scott Dorsey]

Brian Takei > wrote:
>Offhand I was thinking of using a single 4 conductor cable for the run,
>but as far as connectors I didn't find anything at Markertek besides the
>standard single connectors, and got stuck. Short of a patch bay, are
>there special connectors/cable available for this sort of DIY
>'insert/split' application that avoid the condition of having conductors
>unprotected outside the shield/barrel?

Heat shrink is your friend.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

[Brian Takei]

Scott Dorsey ) wrote:
> Brian Takei > wrote:
> > ... Short of a patch bay, are
> >there special connectors/cable available for this sort of DIY
> >'insert/split' application that avoid the condition of having conductors
> >unprotected outside the shield/barrel?
>
> Heat shrink is your friend.


Doh. And I suppose for me to worry about shielding in this case is to
"worry way too much".

- Brian