Setting up the 01v as a remote for SX

[Johannes Oscarsson]

Hi everyone, I'm new to this group.

I wonder how I set up my 01v to control Cubase SX via MIDI on my iMac.
I connect the devices using a Midisport 4x4 interface, with the 01v
MIDI out connected to the MIDISport in C. The 01v MIDI In goes to
MIDIsport out D.

What settings need i do in
a) The OS? I run OS 10.2
b) Cubase SX
c) The 01v

I'd like to be able to record audio through the 01v while I use the
01v to control the software faders of Cubase SX, is this possible?

Thanks in advance,
Johannes Oscarsson, Sweden

[Bill Lorentzen]

You might be better off asking this question on the Steinberg forums, or
calling Yamaha tech support.
--
Bill L

"Johannes Oscarsson" > wrote in message
m...
> Hi everyone, I'm new to this group.
>
> I wonder how I set up my 01v to control Cubase SX via MIDI on my iMac.
> I connect the devices using a Midisport 4x4 interface, with the 01v
> MIDI out connected to the MIDISport in C. The 01v MIDI In goes to
> MIDIsport out D.
>
> What settings need i do in
> a) The OS? I run OS 10.2
> b) Cubase SX
> c) The 01v
>
> I'd like to be able to record audio through the 01v while I use the
> 01v to control the software faders of Cubase SX, is this possible?
>
> Thanks in advance,
> Johannes Oscarsson, Sweden

[tojo]

see if you can find the HUI or whatever emulation for the 01v, I know
the 01V96R has HUI emulation and that's what you use in Cubase SX.
go cubase.net and ask for control surface maybe someone there can help
more.

[Mark]

Actually, they support many controllers, including HUI, Mackie Control, etc.
They still offer support... especially now that Houston is all but dead.

"Abyssmal" > wrote in message
> More than likely with the release of the Houston controller, support
> for other controllers will probably be dropped, if they havent been
> already.

[Chris Smalt]

Johannes wrote:

> I wonder how I set up my 01v to control Cubase SX via MIDI on my iMac.
> I connect the devices using a Midisport 4x4 interface, with the 01v
> MIDI out connected to the MIDISport in C. The 01v MIDI In goes to
> MIDIsport out D.
>
> What settings need i do in
> a) The OS? I run OS 10.2
> b) Cubase SX
> c) The 01v


Did you even try to look it up in the Cubase manual? It's page 286 in
the pdf copy I have. I don't have the program, so I can't help you
there, but the explanation looks real simple. I do have one question:
why do you go out of port D, but into port C? Just use the same port -
it makes for easier setup.


Chris