jbclem3
December 2nd 09, 12:38 AM
I just acquired a brand new looking Alpine 7534S am/fm cassette radio. It
only came with an users guide and nothing else, no wiring harness of power
plug. On eBay all I find are 16 pin power plugs and this radio takes a 10
pin (2 rows of 5 pins). It also has two other black plug receptacles,
taking 8 pin plugs, but I think they are for the built-in CD controller and
I probably won't be using that.
If I can't find a 10 pin power plug, I can run individual wires if I have a
schematic or even an installation guide showing the destinations for the
individual wires. When I google for a manual all I get are these manual
companies that want about $40 and payment in advance...that's not going to
happen!
The other issue is this unit has an electronic code. The users guide
indicates that this code will activate if I remove the "key". I see no key,
and the users guide has a spot for a serial number and a code sticker but
neither are there. So first I have to power this radio, then I find out how
if the code is activated.
I'd appreciate any kind of information about these two problems.
John
only came with an users guide and nothing else, no wiring harness of power
plug. On eBay all I find are 16 pin power plugs and this radio takes a 10
pin (2 rows of 5 pins). It also has two other black plug receptacles,
taking 8 pin plugs, but I think they are for the built-in CD controller and
I probably won't be using that.
If I can't find a 10 pin power plug, I can run individual wires if I have a
schematic or even an installation guide showing the destinations for the
individual wires. When I google for a manual all I get are these manual
companies that want about $40 and payment in advance...that's not going to
happen!
The other issue is this unit has an electronic code. The users guide
indicates that this code will activate if I remove the "key". I see no key,
and the users guide has a spot for a serial number and a code sticker but
neither are there. So first I have to power this radio, then I find out how
if the code is activated.
I'd appreciate any kind of information about these two problems.
John