Sony MXP 2000/2900 connector

[Joe[_14_]]

Hi...Does any one know a source for the 45 pin connector that is used
on these console? New or used is OK. Also I would be interested in a
copy of the instruction book/manual for this also.
Thanks for any info

[polymod]

"Joe" > wrote in message
...
> Hi...Does any one know a source for the 45 pin connector that is used
> on these console? New or used is OK. Also I would be interested in a
> copy of the instruction book/manual for this also.
> Thanks for any info

google search comes up with this:

http://www.google.com/search?hl=en&source=hp&fkt=2030&fsdt=5930&q=Sony+MXP+2000%2F2900+45+pin+connector&aq=f&oq=&aqi=

Poly

[Mike Rivers]

Joe wrote:
> Hi...Does any one know a source for the 45 pin connector that is used
> on these console?

Randy Blevins http://www.blevinsaudio.com/main.htm usually has them, and
manuals, too. He's one of the well established MCI experts. He's very
knowledgeable and helpful, but not cheap.

[Scott Dorsey]

In article >,
Mike Rivers > wrote:
>Joe wrote:
>> Hi...Does any one know a source for the 45 pin connector that is used
>> on these console?
>
>Randy Blevins http://www.blevinsaudio.com/main.htm usually has them, and
>manuals, too. He's one of the well established MCI experts. He's very
>knowledgeable and helpful, but not cheap.

If it's the same multi-pin connector that the later MCI consoles used
(pins, blue fibreglass body), it's an Amphenol part and Connector World
Supply in Seattle should be able to get one. You may have to get them a
photo so they can identify it if you don't have the numbers off of one.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

[Mike Rivers]

Scott Dorsey wrote:

> If it's the same multi-pin connector that the later MCI consoles used
> (pins, blue fibreglass body), it's an Amphenol part and Connector World
> Supply in Seattle should be able to get one.

The common ones are 30 pins. 8 pairs and a few spares. I'm not sure I've
ever seen a 45 pin one. Never looked at the back of a 2000 series MCI
console.

[[email protected]]

On Tuesday, October 6, 2009 3:01:35 PM UTC-4, Mike Rivers wrote:
> Scott Dorsey wrote:
>
> > If it's the same multi-pin connector that the later MCI consoles used
> > (pins, blue fibreglass body), it's an Amphenol part and Connector World
> > Supply in Seattle should be able to get one.
>
> The common ones are 30 pins. 8 pairs and a few spares. I'm not sure I've
> ever seen a 45 pin one. Never looked at the back of a 2000 series MCI
> console.

EIAJ RECTANGULAR 45 PIN MALE E45M

http://www.markertek.com/product/e45m/eiaj-rectangular-45-pin-male
http://www.probroadcastsupply.com/eiaj-rectangular-45-pin-male-e45m/

http://i93.photobucket.com/albums/l70/discobeet/ScreenShot2014-10-24at92129PM.png

[PStamler]

Note that this is a thread from 2009.

Peace,
Paul

[hank alrich]

PStamler > wrote:

> Note that this is a thread from 2009.
>
> Peace,
> Paul

I'm looking for the best wrench to adjust my dinosaur's instigator.

--
shut up and play your guitar * HankAlrich.Com
HankandShaidriMusic.Com
YouTube.Com/WalkinayMusic

[Les Cargill[_4_]]

(hank alrich) wrote:
> PStamler > wrote:
>
>> Note that this is a thread from 2009.
>>
>> Peace,
>> Paul
>
> I'm looking for the best wrench to adjust my dinosaur's instigator.
>

Those were eliminated in a recall in 1001. Fire hazard.

--
Les Cargill

[Peter Larsen[_3_]]

"Les Cargill" > skrev i en meddelelse
...

> (hank alrich) wrote:
>> PStamler > wrote:

>>> Note that this is a thread from 2009.

>>> Peace,
>>> Paul

>> I'm looking for the best wrench to adjust my dinosaur's instigator.

> Those were eliminated in a recall in 1001. Fire hazard.

Not at all a hazard, a feature, a precursor for a later Nakamichi product.

> Les Cargill

Kind regards

Peter Larsen

[hank alrich]

Peter Larsen > wrote:

> "Les Cargill" > skrev i en meddelelse
> ...
>
> > (hank alrich) wrote:
> >> PStamler > wrote:
>
> >>> Note that this is a thread from 2009.
>
> >>> Peace,
> >>> Paul
>
> >> I'm looking for the best wrench to adjust my dinosaur's instigator.
>
> > Those were eliminated in a recall in 1001. Fire hazard.
>
> Not at all a hazard, a feature, a precursor for a later Nakamichi product.

I thought only the model intended for use with dragons got the recall
notice.

--
shut up and play your guitar * HankAlrich.Com
HankandShaidriMusic.Com
YouTube.Com/WalkinayMusic

[Les Cargill[_4_]]

(hank alrich) wrote:
> Peter Larsen > wrote:
>
>> "Les Cargill" > skrev i en meddelelse
>> ...
>>
>>> (hank alrich) wrote:
>>>> PStamler > wrote:
>>
>>>>> Note that this is a thread from 2009.
>>
>>>>> Peace,
>>>>> Paul
>>
>>>> I'm looking for the best wrench to adjust my dinosaur's instigator.
>>
>>> Those were eliminated in a recall in 1001. Fire hazard.
>>
>> Not at all a hazard, a feature, a precursor for a later Nakamichi product.
>
> I thought only the model intended for use with dragons got the recall
> notice.
>


The part numbers were the same excerpt for two transposed digits. The
case was the same shape. Hilarity ensued.

--
Les Cargill