PDA

View Full Version : Problem with Audacity ® 1.3.8 (Unicode)


CJB
August 13th 09, 07:43 PM
I have a Toshiba Qomio G30.

I have Audacity 1.3.8 (and also an earlier version). I can record from
say an audio streaming website using the setting for 'Stereo Mix' with
'S/W Play Through' de-clicked. (With this clicked I get echoes.)

However I cannot record using Behringr U-Control UCA202 device.

I have a tape player with a line out port. I connect this to the input
of the U-Control. I make sure that the volume o/p on both is set to
minimal. I connect the USB o/p of the U-Control to a USB port on the
laptop.

Then I start up Audacity. I select 'S/W Play Through' and 'Line In'
then click on Record then slowly bring up the volume levels of the
tape player and U-Control until both are at maximum - but then -
nothing. It Audacity refuses to record the audio input. It used to
work OK, but not now.

Please does anyone have any suggestions.

Thanks - Chris B.

P.S. I also have an iMic which also does not record - although it used
to.

Richard Crowley
August 13th 09, 08:59 PM
"CJB" wrote...
>I have a Toshiba Qomio G30.
> I have Audacity 1.3.8 (and also an earlier version). I can record from
> say an audio streaming website using the setting for 'Stereo Mix' with
> 'S/W Play Through' de-clicked. (With this clicked I get echoes.)
>
> However I cannot record using Behringr U-Control UCA202 device.
>
> I have a tape player with a line out port. I connect this to the input
> of the U-Control. I make sure that the volume o/p on both is set to
> minimal. I connect the USB o/p of the U-Control to a USB port on the
> laptop.
>
> Then I start up Audacity. I select 'S/W Play Through' and 'Line In'
> then click on Record then slowly bring up the volume levels of the
> tape player and U-Control until both are at maximum - but then -
> nothing. It Audacity refuses to record the audio input.

"Line In" is some (real or imaginary) analog input to the sound card.
It is NOT any kind of USB device (like the U-Control dongle, etc.)
Unless you have a source connected to the computer analog Line In
connector, I would expect it to behave exactly as you describe.

Somewhere you must select the USB gadget, NOT "Line In".

Ben Bradley[_2_]
August 14th 09, 03:55 AM
On Thu, 13 Aug 2009 11:43:37 -0700 (PDT), CJB >
wrote:

>I have a Toshiba Qomio G30.
>
>I have Audacity 1.3.8 (and also an earlier version). I can record from
>say an audio streaming website using the setting for 'Stereo Mix' with
>'S/W Play Through' de-clicked. (With this clicked I get echoes.)
>
>However I cannot record using Behringr U-Control UCA202 device.
>
>I have a tape player with a line out port. I connect this to the input
>of the U-Control. I make sure that the volume o/p on both is set to
>minimal. I connect the USB o/p of the U-Control to a USB port on the
>laptop.
>
>Then I start up Audacity. I select 'S/W Play Through' and 'Line In'
>then click on Record then slowly bring up the volume levels of the
>tape player and U-Control until both are at maximum - but then -
>nothing. It Audacity refuses to record the audio input. It used to
>work OK, but not now.

In Audacity you should be able to go to edit->options and then
select the desired recording device from all the ones recognized by
your computer.


>
>Please does anyone have any suggestions.
>
>Thanks - Chris B.
>
>P.S. I also have an iMic which also does not record - although it used
>to.