Reslo mic question`

[Fount]

Hi all
I hope I can get some help for this seemingly difficult question. I have
just purchased a vintage Reslo PGD mic in virtually mint condition for its
age. I can't seem to find a jack to fit it. It requires a male old type
amphenol connector (I'm told) and it appears to be about 3/4" OD.

Does anybody know where such a beast can be purchased?

[Fount]

"Soundhaspriority" > wrote in message
...
>
> "Fount" > wrote in message
> ...
>> Hi all
>> I hope I can get some help for this seemingly difficult question. I have
>> just purchased a vintage Reslo PGD mic in virtually mint condition for
>> its age. I can't seem to find a jack to fit it. It requires a male old
>> type amphenol connector (I'm told) and it appears to be about 3/4" OD.
>>
>> Does anybody know where such a beast can be purchased?
>>
>>
> It could be the 80MC1M on this page:
> http://www.kenselectronics.com/lists/micplug.htm
>
> Bob Morein
> (310) 237-6511
>

Thanks very much for that. It may well be. I'll contact them. You know I
searched for hours on the net and never once turned this site up.

I appreciate your help.

[Fount]

"Soundhaspriority" > wrote in message
...
>
> "Fount" > wrote in message
> ...
>> Hi all
>> I hope I can get some help for this seemingly difficult question. I have
>> just purchased a vintage Reslo PGD mic in virtually mint condition for
>> its age. I can't seem to find a jack to fit it. It requires a male old
>> type amphenol connector (I'm told) and it appears to be about 3/4" OD.
>>
>> Does anybody know where such a beast can be purchased?
>>
>>
> It could be the 80MC1M on this page:
> http://www.kenselectronics.com/lists/micplug.htm
>
> Bob Morein
> (310) 237-6511
>

Just having a look over Ken's site reveals that he wants valid credit card
details for an inquiry! Once again I appreciate you giving me the site
address but I'm just a little concerned about a site that wants a valid
credit card number for an inquiry. I can only assume that he checks the
credit card number to ensure its validity. Pretty interesting way to do
business.

[Scott Dorsey]

Fount > wrote:
>Hi all
>I hope I can get some help for this seemingly difficult question. I have
>just purchased a vintage Reslo PGD mic in virtually mint condition for its
>age. I can't seem to find a jack to fit it. It requires a male old type
>amphenol connector (I'm told) and it appears to be about 3/4" OD.
>
>Does anybody know where such a beast can be purchased?

In the US, Newark has them. They aren't made by Amphenol any more, I
think WECO is the company that bought the old Amphenol lines.

Connector World Supply in Seattle also stocks them.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

[Fount]

"Soundhaspriority" > wrote in message
...
>
> "Fount" > wrote in message
> ...
>>
> [snip]
>>>
>>
>> It does look suspect doesn't it?
> Fount, I have no connection with the seller. I have never bought from it,
> and provided the link as a service to you.
>
> The forgery by "Robert Morein", commenting on "Robert Morein", was
> authored by Brian L. McCarty, a resident of Cairns, Australia. He posts
> mainly from Buzzard News, as in the below header. Mr. McCarty blames me
> for his various problems with the law, hence the forgeries.
>
> Path:
> border1.nntp.dca.giganews.com!nntp.giganews.com!nx 01.iad01.newshosting.com!newshosting.com!post01.ia d!news.buzzardnews.com!not-for-mail
> User-Agent: Microsoft-Entourage/12.20.0.090605
> Date: Mon, 10 Aug 2009 08:04:55 +
>
> I hope you obtain the connector from a seller with less dubious policies.
>
> Regards,
> Bob Morein
> (310) 237-6511
>

Thank you for clarifying that. I do appreciate you posting the site for me.
I have no idea if it is a scam or not. I did find one place that has really
hard to find mic leads, and the Newark site probably will have it, its just
overwhelming with the selection. I'll persevere.

[Richard Crowley]

Fount wrote:
> Brian McCarty pretending to be "Robert Morein" wrote ...

><The typical McCarty insane blathering garbage. >

> It does look suspect doesn't it?

Please don't feed the notorious troll.
And while we're at it. Can't you Aussie people do something
about this idiot?