Scott Dorsey
July 20th 09, 06:43 PM
badboyallmylife > wrote:
>
>Thanks....The original enclosures were homebuilt but well built. 3/4
>inch mahogany veneered birch plywood with bolt on backs and
>t-nuts. No terminal plates...just wire coming from a hole in the
>back. One had been painted black on the baffle and the other was
>fine. Grills were covered in some sort of "prom dress" black cloth
>but looked nice. I just did not have anymore room for something this
>large. I'll regret the decision to sell these at a later date.
Problem is that any other cabinet you're going to put them in is going
to be just as large as the cabinets you pitched.... check out the Vas
on those drivers....
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
>
>Thanks....The original enclosures were homebuilt but well built. 3/4
>inch mahogany veneered birch plywood with bolt on backs and
>t-nuts. No terminal plates...just wire coming from a hole in the
>back. One had been painted black on the baffle and the other was
>fine. Grills were covered in some sort of "prom dress" black cloth
>but looked nice. I just did not have anymore room for something this
>large. I'll regret the decision to sell these at a later date.
Problem is that any other cabinet you're going to put them in is going
to be just as large as the cabinets you pitched.... check out the Vas
on those drivers....
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."