Low Prifile B9A PCB sockets

[Ian Bell[_2_]]

I am building a mic pre in a 2U 19 inch rack box. It turns out the PCB
thickness plus the B9A socket height plus the tube height is exactly 2U.
Trouble is I need to mount the PCB a little above the the case bottom so
I need to gain a few mm from somewhere. The PCB mounting B9A sockets I
have at the moment are 14mm high so my easiest solution would be to find
a low profile version of these that are 10mm or less high. Anyone know
of a source of such a socket??

Cheers

Ian

[Phil Allison[_3_]]

"Ian Bell is ****ing tenth wit" "

>
> I am building a mic pre in a 2U 19 inch rack box.


** Then the tubes mount in the HORIZONTAL plane !!

You ANENCEPHALIC POMMY IMBECILE !!!!!




..... Phil

[[email protected]]

On Jul 17, 6:53*am, Ian Bell > wrote:
> I am building a mic pre in a 2U 19 inch rack box. It turns out the PCB
> thickness plus the B9A socket height plus the tube height is exactly 2U.
> Trouble is I need to mount the PCB a little above the the case bottom so
> I need to gain a few mm from somewhere. The PCB mounting B9A sockets I
> have at the moment are 14mm high so my easiest solution would be to find
> a low profile version of these that are 10mm or less high. Anyone know
> of a source of such a socket??

Simpler to punch the PCB and use through-mount sockets. There are any
number of them available.

Peter Wieck
Melrose Park, PA

[[email protected]]

On Jul 17, 7:00*am, "Phil Allison" > wrote:
> "Ian Bell is ****ing tenth wit" "
>
>
>
> > I am building a mic pre in a 2U 19 inch rack box.
>
> ** *Then the tubes mount *in the HORIZONTAL *plane !!
>
> *You * ANENCEPHALIC *POMMY *IMBECILE * !!!!!
>
> .... *Phil

Nor do you think much either. Perhaps he wants everything to be on one
board without going through the heroics of horizontal sockets... and
as actual, direct, off-the-shelf solutions to his problem are readily
available, your suggestion is simple idiocy.

Peter Wieck
Melrose Park, PA

[Phil Allison[_3_]]

Peter Wieck
Melrose Park, PA

= ****wit & criminal lunatic


"Ian Bell is ****ing tenth wit" "
>
> > I am building a mic pre in a 2U 19 inch rack box.
>
>
> ** Then the tubes mount in the HORIZONTAL plane !!
>
> You ANENCEPHALIC POMMY IMBECILE !!!!!
>

> Nor do you think much either.

** Never known this moronic septic ****head to think at all.

> Perhaps he wants....


** Wild suppositions are not reasoned thoughts.

They are, however, a sure sign of late stage

AUTISTIC DEMENTIA !!!!!!



..... Phil

[Phil Allison[_3_]]

Peter Wieck
Melrose Park, PA


Simpler to punch the PCB and use through-mount sockets. There are any
number of them available.



** Where is the missing link ?

**** head.



........ Phil

[Ian Bell[_2_]]

Phil Allison wrote:
> "Ian Bell is ****ing tenth wit" "
>
>> I am building a mic pre in a 2U 19 inch rack box.
>
>
> ** Then the tubes mount in the HORIZONTAL plane !!
>
> You ANENCEPHALIC POMMY IMBECILE !!!!!
>
>
>

In order to minimise microphony, the grids need to be vertical not
horizontal, so although mounting them horizontally solves the height
problem it creates another.

Cheers

Ian

[[email protected]]

On Jul 17, 8:49*am, "Phil Allison" > wrote:

> ** Where is the missing link ?

Got a mirror? Find it there - although you most definitely would be
the weakest.

Peter Wieck
Melrose Park, PA

[Phil Allison[_3_]]

Peter Wieck
Criminal Psychopath

Melrose Park, PA


Simpler to punch the PCB and use through-mount sockets. There are any
number of them available.



** Where is the missing link ?

**** head.



........ Phil