April 17th 09, 01:55 AM
On 16 Apr, 18:54, wrote:
> *I get annoyed sometimes by certain items or objects that reflect a
> lack of thinking on the part of the designers, or in some cases,
> things that when built actually did make sense but don't now. We run
> across them rarely today in most cases but some do show up every once
> and a while.
>
> *Some of mine:
>
> *Tube amps with sizable power tubes on PCBs. Audio Research, are you
> listening???
>
> *Jeeps with square headlights. They remind me of bad Hank Marvin
> imitators. In fact, to be honest, they remind me of Hank Marvin. If
> you are not a guitar geek, he's, well, annoying.
>
> *Attempts at linear tracking tonearms that don't use compressed air.
> Nothing else works.
>
> *Audio interconnect cables with RCA ends costing more than a few
> dollars each. Hey folks, RCAs suck. They ARE the choke point.
>
> *People who can't solder.
>
> *Car mechanics that lecture you on how highly trained they are in
> electronics that can't tell you the difference between a NPN and PNP
> transistor or tell you what the output of a NAND gate is with any
> possible input state combination.
>
> *People who deny that a 356/912 Porsche engine is a Volkswagen.
>
> * Shortwave radios without a BFO. Unfortunately, SSB is here to stay,
> you morons.
>
> *Tube rollers. TUBE ROLLERS EAT ****.
>
> *People who think that without Bill Gates there would be no Internet.
>
> *The vacuum operated headlight doors on 70s Ford products. Pain in the
> ass!!!
>
> *Transmission shops that try to sell you a rebuilt replacement for
> known ****box transmissions instrad of upgrading to one that will hold
> up.
>
> *RoHS.
>
> *Any engine made in (or 'outsourced from') Williamsport, PA, none of
> which have ever been as reliable as a small block Chevy.
>
> *People who call transmitting tubes "transmission tubes". A
> transmission tube is what you had on Buicks and Pontiac Tempests.
>
> *Any Bosch fuel injection system except the mechanical cam diesel
> pumps or K-Jetronic.
>
> *Butt sets without RJ connectors and some kind of current protection
> so you don't fry the board after an oops. Hello Dracon!
>
> *The ****ty jacks GM puts in their current cars.
>
> *The tool kits BMW offers as an option for their cars. Hey, for that
> price, you can get Snap-Ons.
>
> *There are more, lots more. i invite your suggestions. And note, I'm
> staying away from politics or religion or race on this one. Let's take
> the high road here.
what annoys me are racists that demand I take the high road against
them.
> *I get annoyed sometimes by certain items or objects that reflect a
> lack of thinking on the part of the designers, or in some cases,
> things that when built actually did make sense but don't now. We run
> across them rarely today in most cases but some do show up every once
> and a while.
>
> *Some of mine:
>
> *Tube amps with sizable power tubes on PCBs. Audio Research, are you
> listening???
>
> *Jeeps with square headlights. They remind me of bad Hank Marvin
> imitators. In fact, to be honest, they remind me of Hank Marvin. If
> you are not a guitar geek, he's, well, annoying.
>
> *Attempts at linear tracking tonearms that don't use compressed air.
> Nothing else works.
>
> *Audio interconnect cables with RCA ends costing more than a few
> dollars each. Hey folks, RCAs suck. They ARE the choke point.
>
> *People who can't solder.
>
> *Car mechanics that lecture you on how highly trained they are in
> electronics that can't tell you the difference between a NPN and PNP
> transistor or tell you what the output of a NAND gate is with any
> possible input state combination.
>
> *People who deny that a 356/912 Porsche engine is a Volkswagen.
>
> * Shortwave radios without a BFO. Unfortunately, SSB is here to stay,
> you morons.
>
> *Tube rollers. TUBE ROLLERS EAT ****.
>
> *People who think that without Bill Gates there would be no Internet.
>
> *The vacuum operated headlight doors on 70s Ford products. Pain in the
> ass!!!
>
> *Transmission shops that try to sell you a rebuilt replacement for
> known ****box transmissions instrad of upgrading to one that will hold
> up.
>
> *RoHS.
>
> *Any engine made in (or 'outsourced from') Williamsport, PA, none of
> which have ever been as reliable as a small block Chevy.
>
> *People who call transmitting tubes "transmission tubes". A
> transmission tube is what you had on Buicks and Pontiac Tempests.
>
> *Any Bosch fuel injection system except the mechanical cam diesel
> pumps or K-Jetronic.
>
> *Butt sets without RJ connectors and some kind of current protection
> so you don't fry the board after an oops. Hello Dracon!
>
> *The ****ty jacks GM puts in their current cars.
>
> *The tool kits BMW offers as an option for their cars. Hey, for that
> price, you can get Snap-Ons.
>
> *There are more, lots more. i invite your suggestions. And note, I'm
> staying away from politics or religion or race on this one. Let's take
> the high road here.
what annoys me are racists that demand I take the high road against
them.