Can I plug my keyboard output into my guitar effects input?

[Pablo]

I have a couple of synth sound modules: Yamaha TG300 and an Akai
SG01p. I would like to put them through my Behringer V-Amp 2 guitar
effects. Obviously the V-Amp is designed to have guitars plugged in to
it, so will I fry it if I plug a synth into it?

Paul

[Pablo]

On 27 Feb, 14:41, François Yves Le Gal > wrote:
> On Fri, 27 Feb 2009 05:35:29 -0800 (PST), Pablo
>
> > wrote:
> > Obviously the V-Amp is designed to have guitars plugged in to
> >it, so will I fry it if I plug a synth into it?
>
> No problemo. Use the AUX IN input, which is designed for line-level signals.
Thanks,

Does that input get passed through the amp/speaker simulations and
effects sections?

Paul

[David Nebenzahl]

On 2/27/2009 8:26 AM Pablo spake thus:

> On 27 Feb, 14:41, François Yves Le Gal > wrote:
>
>> On Fri, 27 Feb 2009 05:35:29 -0800 (PST), Pablo
>> > wrote:
>>
>>> Obviously the V-Amp is designed to have guitars plugged in to
>>>it, so will I fry it if I plug a synth into it?
>>
>> No problemo. Use the AUX IN input, which is designed for line-level signals.
>
> Does that input get passed through the amp/speaker simulations and
> effects sections?

Your users manual should tell you that. If you don't have one, there's
probably one out there on the Internets somewhere ...


--
Personally, I like Vista, but I probably won't use it. I like it
because it generates considerable business for me in consulting and
upgrades. As long as there is hardware and software out there that
doesn't work, I stay in business. Incidentally, my company motto is
"If this stuff worked, you wouldn't need me".

- lifted from sci.electronics.repair

[Mr.T]

"David Nebenzahl" > wrote in message
.com...
> Your users manual should tell you that. If you don't have one, there's
> probably one out there on the Internets somewhere ...

Most of the Behringer manuals are already on their web site.

MrT.