Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Need Kicker amp recommendations!
Only things missing in my system are 2 kicker amps. Please help my
decision: 1. KX200.2 or KX350.2? -- to power a JL Audio XR570-CSi (5x7 components). Specs say 70 watts continuous and recommended amp 25-150watts. But I don't know if that means per/channel or total. REGARDLESS, which amp should I purchase? I am in only for SQ not SPL, and money is an object. 2. KX400.1 or KX600.1? -- to power 2 JL Audio 10" 10w0's in a sealed box. Once again, I don't need crazy SLP, just some bass to match the front components. The 10w0's ask for 250 watts rms for the 2 of them, so would the KX400.1 be grossly under powering them? Obviously the KX600.1 gain could be tuned down but it's also more $ that i'm tight for. I don't use rear fill. The car is a 93 mazda mx6LS and for now i'm using a basic Clarion mp545 deck. For money, right now i'm thinking either 200.2 and the 400.1, or 350.2 and 400.1 unless you guys change my mind to go up to the 600.1. THANKS!!! |
#2
|
|||
|
|||
Go with the 70 watt per ch. amp for the 5x7's, thats enough.
Id go with the bigger amp for the subs. I know its more money, but every time I waver between to amps I always kick myself when I get the smaller one. |
#3
|
|||
|
|||
|
#4
|
|||
|
|||
Also just wanted to add to that post that KX550.3 and KX650.4 are also options.
|
#5
|
|||
|
|||
NOT impressed with Kicker's tech support. Look at the email I
sent/received. Did they even READ it? Are they thinking that 4ohm watts are simply HALF of 2 ohm watts? What a joke. I wrote them back tearing them apart. This is what THEY said: ----------------------------------------------------------------------------- The KX650.4 will give you about 90 watts per channel. This is ok for the 5x7 but not enough for the 10. The KX550.3 will give you about 45 watts for the 5x7 but 225 for the 10. The KX200.2 will give you 50 watts for the 5x7 and the KX250.2 will give you 250 watts for the 10. None of these are really a good choice for your speakers. I suggest the KX250.2 for your 5x7 and the KX150.2 for your 10. THIS IS WHAT I SAID: -----Original Message----- From: ] Sent: Tuesday, March 29, 2005 6:53 PM To: Subject: Product Recommendations Hi I was wondering if you could help me choose an amp(s) to power these speakers: JL Audio XR570csi (5X7 components) rated 70 watts continuous and recommended amp power 25 watts to 150 watts 2 JL Audio 10w0 10" subs in sealed box 8 ohms each. Have them in parallel so 4 ohm load and rated 125 watts/sub. I have narrowed it down to: 1. KX650.4 2. KX550.3 3. KX200.2 for the components AND KX250.2 for the subs. Can you please tell me which I should purchase? I would like to know from the experts because i'm not having much like with the dealers. THANK YOU. |
#6
|
|||
|
|||
Flashovr29 wrote:
NOT impressed with Kicker's tech support. Look at the email I sent/received. Did they even READ it? Are they thinking that 4ohm watts are simply HALF of 2 ohm watts? What a joke. I wrote them back tearing them apart. This is what THEY said: ----------------------------------------------------------------------------- The KX650.4 will give you about 90 watts per channel. This is ok for the 5x7 but not enough for the 10. The KX550.3 will give you about 45 watts for the 5x7 but 225 for the 10. The KX200.2 will give you 50 watts for the 5x7 and the KX250.2 will give you 250 watts for the 10. None of these are really a good choice for your speakers. I suggest the KX250.2 for your 5x7 and the KX150.2 for your 10. THIS IS WHAT I SAID: -----Original Message----- From: ] Sent: Tuesday, March 29, 2005 6:53 PM To: Subject: Product Recommendations Hi I was wondering if you could help me choose an amp(s) to power these speakers: JL Audio XR570csi (5X7 components) rated 70 watts continuous and recommended amp power 25 watts to 150 watts 2 JL Audio 10w0 10" subs in sealed box 8 ohms each. Have them in parallel so 4 ohm load and rated 125 watts/sub. I have narrowed it down to: 1. KX650.4 2. KX550.3 3. KX200.2 for the components AND KX250.2 for the subs. Can you please tell me which I should purchase? I would like to know from the experts because i'm not having much like with the dealers. THANK YOU. OOPS :-) I have a Zapco AG200 that would do nicely for either the components or the subs if you want. 50W x 2 @ 4ohm 195W x 1 @ 4ohm Email me if you are interested. -- Dan Snooks |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help with sub wiring and ohm loads. Also, anyone have a 12" Kicker Comp for sale? | Car Audio | |||
What are they Teaching | Audio Opinions | |||
Major built-in crossover confusion.Alpine CDA-7995 HU & Kicker KX700.5 35W x 4 + 400W x 1 | Car Audio | |||
good amp for the kicker L7 | High End Audio | |||
FS: Eclipse, Kicker subs/amps, Image Dynamics horns, other stuff | Car Audio |