Reply
 
Thread Tools Display Modes
  #1   Report Post  
Engineer
 
Posts: n/a
Default Wanted: Schematic for Heathkit AG-8

Hi, RATS and Radio/Phonos.

I have just acquired an old Heathkit tube-based audio sig. gen, model AG-8.
Unfortunately, the schematic that came with it is for a the AG-10
sine/square wave tube sig. gen, quite a bit different.

Is anyone able to sell me an AG-8 manual or perhaps make and mail me a copy?
(Costs covered) Also, does anyone want an AG-10 manual?

My email address is: 'SurfNews "at" sprint "dot" ca', but not in those
symbols.

Thanks & cheers,

Roger
--
Roger Jones, P.Eng.
Thornhill, Ontario
Canada

"Friends don't let friends vote Liberal"


  #2   Report Post  
Gregg
 
Posts: n/a
Default

Try http://bama.sbc.edu

--
Gregg
*It's probably useful, even if it can't be SPICE'd*
http://geek.scorpiorising.ca
  #3   Report Post  
BFoelsch
 
Posts: n/a
Default

Just posted one at alt.binaries.schematics.electronic

"Engineer" wrote in message
...
Hi, RATS and Radio/Phonos.

I have just acquired an old Heathkit tube-based audio sig. gen, model

AG-8.
Unfortunately, the schematic that came with it is for a the AG-10
sine/square wave tube sig. gen, quite a bit different.

Is anyone able to sell me an AG-8 manual or perhaps make and mail me a

copy?
(Costs covered) Also, does anyone want an AG-10 manual?

My email address is: 'SurfNews "at" sprint "dot" ca', but not in those
symbols.

Thanks & cheers,

Roger
--
Roger Jones, P.Eng.
Thornhill, Ontario
Canada

"Friends don't let friends vote Liberal"




  #4   Report Post  
Engineer
 
Posts: n/a
Default

"Gregg" wrote in message
news:0Apib.12884$Pe5.403@edtnps84...
Try http://bama.sbc.edu

--
Gregg
*It's probably useful, even if it can't be SPICE'd*
http://geek.scorpiorising.ca


Thanks. The AG-10 (audio sine/square sig.gen.) is there but I did not find
the AG-8.

Cheers,

Roger


  #5   Report Post  
Engineer
 
Posts: n/a
Default

Thanks, BF.

I can see the schematic in the e-mail but OE stripped the ag-8.gif
attachment as "unsafe"! Tried printing it but could not size to page! So I
saved the email for reference at least.

Will go to the binaries and try again.

Cheers,

Roger


"BFoelsch" wrote in message
...

(snip)




  #6   Report Post  
BFoelsch
 
Posts: n/a
Default

If you want I can e-mail the schematic directly to you, but I assure you the
file is safe. Check your OE security setings.

Hey, Tim Williams, You are the graphics guy, how about helping out here!


"Engineer" wrote in message
...
Thanks, BF.

I can see the schematic in the e-mail but OE stripped the ag-8.gif
attachment as "unsafe"! Tried printing it but could not size to page! So

I
saved the email for reference at least.

Will go to the binaries and try again.

Cheers,

Roger


"BFoelsch" wrote in message
...

(snip)




  #7   Report Post  
Jeffrey D Angus
 
Posts: n/a
Default

Well, I saved it, and converted it to a .jpg for you.
Then I found you're running a bogus email address and NO
indication of what it really is. Sorry, Can't send it now.

Jeff

Engineer wrote:

Thanks, BF.

I can see the schematic in the e-mail but OE stripped the ag-8.gif
attachment as "unsafe"! Tried printing it but could not size to page! So I
saved the email for reference at least.

Will go to the binaries and try again.

Cheers,

Roger


"BFoelsch" wrote in message
...

(snip)



--
"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety." Benjamin Franklin
"A life lived in fear is a life half lived."
Tara Morice as Fran, from the movie "Strictly Ballroom"

  #8   Report Post  
Engineer
 
Posts: n/a
Default

"Jeffrey D Angus" wrote in message
...
Well, I saved it, and converted it to a .jpg for you.
Then I found you're running a bogus email address and NO
indication of what it really is. Sorry, Can't send it now.

Jeff


(snip)

Jeff, I appreciate the problem! I hide my address as the last one was
harvested from a NG by someone or something that then sent me hundreds of
large nasty attachments - now I'm spooked!

If you are willing could you kindly send me the AG-8 .jpg to
surfnews"at"sprint"dot"ca but rewritten as a proper address.

Many thanks.

Roger
--
Roger Jones, P.Eng.
Thornhill, Ontario,
Canada


  #9   Report Post  
Jeffrey D Angus
 
Posts: n/a
Default



Engineer wrote:

If you are willing could you kindly send me the AG-8 .jpg to
surfnews"at"sprint"dot"ca but rewritten as a proper address.


On it's way.

Jeff

--
"They that can give up essential liberty to obtain a little temporary
safety deserve neither liberty nor safety." Benjamin Franklin
"A life lived in fear is a life half lived."
Tara Morice as Fran, from the movie "Strictly Ballroom"

Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wanted: INFO or Schematic for BIRCH SP 656 Phonograph unc80 Tech 0 March 23rd 04 11:14 PM
Wanted: INFO or Schematic for BIRCH SP 656 Phonograph unc80 Marketplace 0 March 23rd 04 11:14 PM
WANTED: INFO, SCHEMATIC OR 10" WOOFERS for JENSEN TF-3 SPEAKERS unc80 Pro Audio 0 March 5th 04 12:30 AM
WANTED: INFO, SCHEMATIC OR 10" WOOFERS for JENSEN TF-3 SPEAKERS unc80 Tech 0 March 5th 04 12:29 AM
Wanted: INFO, SCHEMATIC OR 10" WOOFERS for JENSEN TF-3 SPEAKERS unc80 Marketplace 0 March 5th 04 12:28 AM


All times are GMT +1. The time now is 10:23 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"