[Pablo]

I have a couple of synth sound modules: Yamaha TG300 and an Akai
SG01p. I would like to put them through my Behringer V-Amp 2 guitar
effects. Obviously the V-Amp is designed to have guitars plugged in to
it, so will I fry it if I plug a synth into it?

Paul

[Pablo]

On 27 Feb, 14:41, François Yves Le Gal wrote:
On Fri, 27 Feb 2009 05:35:29 -0800 (PST), Pablo

wrote:
Obviously the V-Amp is designed to have guitars plugged in to
it, so will I fry it if I plug a synth into it?

No problemo. Use the AUX IN input, which is designed for line-level signals.
Thanks,

Does that input get passed through the amp/speaker simulations and
effects sections?

Paul

[David Nebenzahl]

On 2/27/2009 8:26 AM Pablo spake thus:

On 27 Feb, 14:41, François Yves Le Gal wrote:

On Fri, 27 Feb 2009 05:35:29 -0800 (PST), Pablo
wrote:

Obviously the V-Amp is designed to have guitars plugged in to
it, so will I fry it if I plug a synth into it?

No problemo. Use the AUX IN input, which is designed for line-level signals.

Does that input get passed through the amp/speaker simulations and
effects sections?

Your users manual should tell you that. If you don't have one, there's
probably one out there on the Internets somewhere ...


--
Personally, I like Vista, but I probably won't use it. I like it
because it generates considerable business for me in consulting and
upgrades. As long as there is hardware and software out there that
doesn't work, I stay in business. Incidentally, my company motto is
"If this stuff worked, you wouldn't need me".

- lifted from sci.electronics.repair

[Mr.T]

"David Nebenzahl" wrote in message
.com...
Your users manual should tell you that. If you don't have one, there's
probably one out there on the Internets somewhere ...

Most of the Behringer manuals are already on their web site.

MrT.