wiring question on a 4 channel amp
I have a 4 channel amp, and a and one DVC 12" that is going to be wired in series ( 2 ohm speaker, 2 ohm stable amp ) what is the best way to bridge the amp to get the most out of it? ( 400 watt, A B C D Channels) do i wired all channels together or go to just A and D Channel? Also my built in crossover controlls are A, and B are tied together and C, and D are together... by the way the amp is a Jensen 400 (lax 400) not a good one i know but till i can aford the one i want it'll have to do... the speaker is a 12' kicker cvr DVC 2 ohm
Last edited by jcor28 : June 24th 08 at 12:23 AM
Reason: i got new questions asked
|