Home |
Search |
Today's Posts |
#81
|
|||
|
|||
Doubling Speaker Dimensions
"Peter Larsen" wrote in message ... Dick understood him clearly, and so did I. It was a very simple question I have no issue with Dicks post, but did he *really* understand him correctly or just make certain assumptions? eg. "This assumes, possibly incorrectly, that you're also doubling the size of the driver as well." and also one of those very good ones that need to be asked occasionally. Asking for information on folded horn design would be a far more useful question IMO. TonyP. |
#82
|
|||
|
|||
Doubling Speaker Dimensions
"Peter Larsen" wrote in message ... Dick understood him clearly, and so did I. It was a very simple question I have no issue with Dicks post, but did he *really* understand him correctly or just make certain assumptions? eg. "This assumes, possibly incorrectly, that you're also doubling the size of the driver as well." and also one of those very good ones that need to be asked occasionally. Asking for information on folded horn design would be a far more useful question IMO. TonyP. |
#83
|
|||
|
|||
Doubling Speaker Dimensions
TonyP wrote:
It seems to me I wasn't the only one who wasn't sure whether you were including flare rate, (often referred to as doubling distance) Now I finally grasp how to read that wording, whereever and by whomever it is "often used" need to understand that it reads in more than one way and should be avoided, especially as a standardized term is available, non-confusing and commonly used in the literature. TonyP. Kind regards Peter Larsen -- ******************************************* * My site is at: http://www.muyiovatki.dk * ******************************************* |
#84
|
|||
|
|||
Doubling Speaker Dimensions
TonyP wrote:
It seems to me I wasn't the only one who wasn't sure whether you were including flare rate, (often referred to as doubling distance) Now I finally grasp how to read that wording, whereever and by whomever it is "often used" need to understand that it reads in more than one way and should be avoided, especially as a standardized term is available, non-confusing and commonly used in the literature. TonyP. Kind regards Peter Larsen -- ******************************************* * My site is at: http://www.muyiovatki.dk * ******************************************* |
#85
|
|||
|
|||
Doubling Speaker Dimensions
TonyP wrote:
It seems to me I wasn't the only one who wasn't sure whether you were including flare rate, (often referred to as doubling distance) Now I finally grasp how to read that wording, whereever and by whomever it is "often used" need to understand that it reads in more than one way and should be avoided, especially as a standardized term is available, non-confusing and commonly used in the literature. TonyP. Kind regards Peter Larsen -- ******************************************* * My site is at: http://www.muyiovatki.dk * ******************************************* |
#86
|
|||
|
|||
Doubling Speaker Dimensions
TonyP wrote:
It seems to me I wasn't the only one who wasn't sure whether you were including flare rate, (often referred to as doubling distance) Now I finally grasp how to read that wording, whereever and by whomever it is "often used" need to understand that it reads in more than one way and should be avoided, especially as a standardized term is available, non-confusing and commonly used in the literature. TonyP. Kind regards Peter Larsen -- ******************************************* * My site is at: http://www.muyiovatki.dk * ******************************************* |
#87
|
|||
|
|||
Doubling Speaker Dimensions
Tony, Peter, et alius,
Thanks for the discussions. Tony's point made me back up and think that maybe it would be better to just do my own design instead of trying to make something like what I was proposing work. --RY Peter Larsen writes: TonyP wrote: It seems to me I wasn't the only one who wasn't sure whether you were including flare rate, (often referred to as doubling distance) Now I finally grasp how to read that wording, whereever and by whomever it is "often used" need to understand that it reads in more than one way and should be avoided, especially as a standardized term is available, non-confusing and commonly used in the literature. TonyP. Kind regards Peter Larsen -- ******************************************* * My site is at: http://www.muyiovatki.dk * ******************************************* -- % Randy Yates % "Bird, on the wing, %% Fuquay-Varina, NC % goes floating by %%% 919-577-9882 % but there's a teardrop in his eye..." %%%% % 'One Summer Dream', *Face The Music*, ELO http://home.earthlink.net/~yatescr |
#88
|
|||
|
|||
Doubling Speaker Dimensions
Tony, Peter, et alius,
Thanks for the discussions. Tony's point made me back up and think that maybe it would be better to just do my own design instead of trying to make something like what I was proposing work. --RY Peter Larsen writes: TonyP wrote: It seems to me I wasn't the only one who wasn't sure whether you were including flare rate, (often referred to as doubling distance) Now I finally grasp how to read that wording, whereever and by whomever it is "often used" need to understand that it reads in more than one way and should be avoided, especially as a standardized term is available, non-confusing and commonly used in the literature. TonyP. Kind regards Peter Larsen -- ******************************************* * My site is at: http://www.muyiovatki.dk * ******************************************* -- % Randy Yates % "Bird, on the wing, %% Fuquay-Varina, NC % goes floating by %%% 919-577-9882 % but there's a teardrop in his eye..." %%%% % 'One Summer Dream', *Face The Music*, ELO http://home.earthlink.net/~yatescr |
#89
|
|||
|
|||
Doubling Speaker Dimensions
Tony, Peter, et alius,
Thanks for the discussions. Tony's point made me back up and think that maybe it would be better to just do my own design instead of trying to make something like what I was proposing work. --RY Peter Larsen writes: TonyP wrote: It seems to me I wasn't the only one who wasn't sure whether you were including flare rate, (often referred to as doubling distance) Now I finally grasp how to read that wording, whereever and by whomever it is "often used" need to understand that it reads in more than one way and should be avoided, especially as a standardized term is available, non-confusing and commonly used in the literature. TonyP. Kind regards Peter Larsen -- ******************************************* * My site is at: http://www.muyiovatki.dk * ******************************************* -- % Randy Yates % "Bird, on the wing, %% Fuquay-Varina, NC % goes floating by %%% 919-577-9882 % but there's a teardrop in his eye..." %%%% % 'One Summer Dream', *Face The Music*, ELO http://home.earthlink.net/~yatescr |
#90
|
|||
|
|||
Doubling Speaker Dimensions
Tony, Peter, et alius,
Thanks for the discussions. Tony's point made me back up and think that maybe it would be better to just do my own design instead of trying to make something like what I was proposing work. --RY Peter Larsen writes: TonyP wrote: It seems to me I wasn't the only one who wasn't sure whether you were including flare rate, (often referred to as doubling distance) Now I finally grasp how to read that wording, whereever and by whomever it is "often used" need to understand that it reads in more than one way and should be avoided, especially as a standardized term is available, non-confusing and commonly used in the literature. TonyP. Kind regards Peter Larsen -- ******************************************* * My site is at: http://www.muyiovatki.dk * ******************************************* -- % Randy Yates % "Bird, on the wing, %% Fuquay-Varina, NC % goes floating by %%% 919-577-9882 % but there's a teardrop in his eye..." %%%% % 'One Summer Dream', *Face The Music*, ELO http://home.earthlink.net/~yatescr |
#91
|
|||
|
|||
Doubling Speaker Dimensions
"Randy Yates" wrote in message ... Thanks for the discussions. Tony's point made me back up and think that maybe it would be better to just do my own design instead of trying to make something like what I was proposing work. Good luck. Just use the Klipschorn, JBL Hartsfield, Tannoy GRF etc. as examples of corner horn design. TonyP. |
#92
|
|||
|
|||
Doubling Speaker Dimensions
"Randy Yates" wrote in message ... Thanks for the discussions. Tony's point made me back up and think that maybe it would be better to just do my own design instead of trying to make something like what I was proposing work. Good luck. Just use the Klipschorn, JBL Hartsfield, Tannoy GRF etc. as examples of corner horn design. TonyP. |
#93
|
|||
|
|||
Doubling Speaker Dimensions
"Randy Yates" wrote in message ... Thanks for the discussions. Tony's point made me back up and think that maybe it would be better to just do my own design instead of trying to make something like what I was proposing work. Good luck. Just use the Klipschorn, JBL Hartsfield, Tannoy GRF etc. as examples of corner horn design. TonyP. |
#94
|
|||
|
|||
Doubling Speaker Dimensions
"Randy Yates" wrote in message ... Thanks for the discussions. Tony's point made me back up and think that maybe it would be better to just do my own design instead of trying to make something like what I was proposing work. Good luck. Just use the Klipschorn, JBL Hartsfield, Tannoy GRF etc. as examples of corner horn design. TonyP. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bose 901 Review | General | |||
rec.audio.car FAQ (Part 3/5) | Car Audio | |||
My equipment review of the Bose 901 | Audio Opinions | |||
Comments about Blind Testing | High End Audio | |||
additional speakers | Tech |