Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Digi 002 / Genelec 6010a/5040a 5.1 system distortion problem
Hi,
I'm trying to set up my Digi 002 to work with the Genelec 6010a/5040a surround system. Last week the 002's power harness finally died, so I sent it off for repair. I got it back today, $300 later, & while the power harness issue seems to have been resolved, I am encountering a new problem: the audio from the 002 out of the 6010a's is horribly distorted. This is the signal chain: MacBook Pro (Intel) Firewire 400/800 cable to Digi 002 002 outs 1-6 via unbalanced 1/4" to RCA adapters 6 RCA cables into Genelec 5040a subwoofer 5 RCA cables out of 5040a to the Genelec 6010a's The weird thing is that the audio sounds fine from the Main stereo 1/4" outs (with the same 1/4" to RCA adapters as above) & it's also fine from the RCA stereo outs... but horrible from mono 1/4" outs 1-6. The sampling rate is set at 44.1k, although the kind of distortion I'm hearing sounds like a sampling rate problem. Does anyone have an idea why this might be happening? I'd really appreciate any help or advice. Thanks! John Supko |
#2
Posted to rec.audio.pro
|
|||
|
|||
Digi 002 / Genelec 6010a/5040a 5.1 system distortion problem
On 5/4/2011 10:07 PM, John Supko wrote:
I'm trying to set up my Digi 002 to work with the Genelec 6010a/5040a surround system. Last week the 002's power harness finally died, so I sent it off for repair. I got it back today, $300 later,& while the power harness issue seems to have been resolved, I am encountering a new problem: the audio from the 002 out of the 6010a's is horribly distorted. 002 outs 1-6 via unbalanced 1/4" to RCA adapters 6 RCA cables into Genelec 5040a subwoofer 5 RCA cables out of 5040a to the Genelec 6010a's Did it work before you sent the Digidesign 002 off for repair? And what's with this power harness thing? Yours is the second one I've heard of recently that has had a "power harness" replaced. If you leave the subwoofer out of the system, do the outputs sound OK going directly to the main speakers? It's an easy test. Just send the same thing to all the outputs and plug each one in turn into one speaker. -- "Today's production equipment is IT based and cannot be operated without a passing knowledge of computing, although it seems that it can be operated without a passing knowledge of audio." - John Watkinson http://mikeriversaudio.wordpress.com - useful and interesting audio stuff |
#3
Posted to rec.audio.pro
|
|||
|
|||
Digi 002 / Genelec 6010a/5040a 5.1 system distortion problem
John Supko wrote:
I'm trying to set up my Digi 002 to work with the Genelec 6010a/5040a surround system. Last week the 002's power harness finally died, so I sent it off for repair. I got it back today, $300 later, & while the power harness issue seems to have been resolved, I am encountering a new problem: the audio from the 002 out of the 6010a's is horribly distorted. If you plug a headphone into the 1/4" output, does it sound okay or does it sound distorted? --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#4
Posted to rec.audio.pro
|
|||
|
|||
Digi 002 / Genelec 6010a/5040a 5.1 system distortion problem
"Mike Rivers" wrote in message ...
And what's with this power harness thing? Yours is the second one I've heard of recently that has had a "power harness" replaced. It's a fairly common issue for Digi 002 and Digi 002R interfaces where the connectors on the power harness fails to deliver current to the main board. Kind of like the Mackie ribbon cable issue... -- /Preben Friis |
#5
Posted to rec.audio.pro
|
|||
|
|||
Digi 002 / Genelec 6010a/5040a 5.1 system distortion problem
On Thu, 5 May 2011 08:57:51 -0400, Mike Rivers wrote
(in article ): And what's with this power harness thing? Yours is the second one I've heard of recently that has had a "power harness" replaced. A known and common 002 problem on early production models. I just had to reseat mine after replacing it about 5-6 years ago. Regards, Ty Ford --Audio Equipment Reviews Audio Production Services Acting and Voiceover Demos http://www.tyford.com Guitar player?:http://www.youtube.com/watch?v=yWaPRHMGhGA |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FA: GENELEC 1029A Monitor System | Pro Audio | |||
FA: GENELEC 1029A Monitor System | Pro Audio | |||
FA: GENELEC 1029A Monitor System | Pro Audio | |||
FA: GENELEC 1029A Monitor System | Pro Audio | |||
DIGI 002 Problem | Pro Audio |