Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Need help from the radio gods; will sacrifice chicken if necessary
Hello radio gods,
I just put in 2 blaupunkt speakers and a CD player from my old car that was junked into the car I just bought (a '90 honda civic). there are only 2 speakers (front left and right). the old ones in the civic were blown so i put the blaukpunkts (50 watts) in from my old car. the tape player in the civic also was bad so I put the Goodmans CD player (cheap but then I don't need anything fancy) in from my last car. Everything seems to work, except for two problems. 1) When I accelerate and the radio is on, there's a weird high pitched buzzing noise. 2) If I raise the volume to a higher level, the signal cuts out / skips. It does this for radio or CD. Perhaps related to this: I connected front left and front right speakers correctly, but I noticed that if I connected the Pos and Neg Rear left / right wires together (those coming out of the CD player) that the signal from the front speakers sounded better - louder and clearer. So I tied the wires together (rear left pos to rear left neg, ditto for rear right). I ask forgiveness if this was a moronic thing to do. Anyway I'd like to fix this problem. I have the CD player manual. It reads Voltage: 12V Polarity: Negative Ground Only Speaker Impedance: 4 ohm - 8 ohm Max Output Power: 4 * 10W MPO thanks in advance |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
On a mission : finding a basic radio | General | |||
BPM Studio, DMP Radio Automation, Jazler, Megamix, DJ all, all VSTI's,AKAI Sample CDs, other | General | |||
Need help from the radio gods; will sacrifice chicken if necessary | Car Audio | |||
radio kaput - light but no sound | Car Audio | |||
Aux-IN 2003 Envoy Radio | Car Audio |