Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
Crosstalk in snake cable that include speaker cables and mic cables
I just bought a used 100 foot snake.
I was surprised at the configuration. It has 2 pair of heavy wires designated as speaker 1 and 2. I had always though that running amps of current through a cable parallel to mic cables would magnetically induce unacceptable amounts of crosstalk into the mic cables. So I ran a test. There was some measurable crosstalk but is was surprisingly low. Low enough that if the mic and speaker are in the same room, acoustic feedback by far dominates the electrical feedback caused by the crosstalk. So it seems this is a usable configuration. Does anyone have experience with snakes of this configuration? thanks Mark |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Crosstalk on snake | Pro Audio | |||
Feeder cables to the snake | Audio Opinions | |||
Feeder cables to the snake | Pro Audio | |||
Monster RCA cables vs. regular RCA cables for analog devices | Pro Audio | |||
FS: Speaker cables: Zu Cable, Discovery, RIPOFF ALERT! | Marketplace |