Reply
 
Thread Tools Display Modes
  #1   Report Post  
Spockie
 
Posts: n/a
Default what the hell is 2 ohm stable running parallel on 4ohm speakers so the amp "sees" 2 ohm speakers, the speakers still get half the power they would if it were 4 ohm stable

what the hell is 2 ohm stable running parallel on 4ohm speakers
so the amp "sees" 2 ohm speakers, the speakers still get half the power
they would if it were 4 ohm stable
  #2   Report Post  
MZ
 
Posts: n/a
Default what the hell is 2 ohm stable running parallel on 4ohm speakers so the amp "sees" 2 ohm speakers, the speakers still get half the power they would if it were 4 ohm stable

what the hell is 2 ohm stable running parallel on 4ohm
speakers
so the amp "sees" 2 ohm speakers, the speakers still get half the

power
they would if it were 4 ohm stable


Where'd you get that from?


  #3   Report Post  
 
Posts: n/a
Default what the hell is 2 ohm stable running parallel on 4ohm speakers so the amp "sees" 2 ohm speakers, the speakers still get half the power they would if it were 4 ohm stable

either write a short msg in the title...and write n/t in the body...or vice
versa...learn it fool :P
"Spockie" wrote in message
1...
what the hell is 2 ohm stable running parallel on 4ohm

speakers
so the amp "sees" 2 ohm speakers, the speakers still get half the

power
they would if it were 4 ohm stable



  #4   Report Post  
Peter Klein
 
Posts: n/a
Default what the hell is 2 ohm stable running parallel on 4ohm speakers so the amp "sees" 2 ohm speakers, the speakers still get half the power they would if it were 4 ohm stable

Learning about Ohms Law would make every 12 volt system builder better
prepared. 2 ohms+2ohms=1ohm. 4 ohms+4ohms=2ohms. Coupling two four ohm
woofers to produce a 2 ohm "see" is a common installation. Conventional car
stereo amps have not changed in many years until "class D" -digital amps
showed up running cool and designed for driving subwoofers. P.


"Spockie" wrote in message
1...
what the hell is 2 ohm stable running parallel on 4ohm

speakers
so the amp "sees" 2 ohm speakers, the speakers still get half the

power
they would if it were 4 ohm stable



Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
rec.audio.car FAQ (Part 4/5) Ian D. Bjorhovde Car Audio 0 March 6th 04 07:54 AM
rec.audio.car FAQ (Part 2/5) Ian D. Bjorhovde Car Audio 0 March 6th 04 07:54 AM
rec.audio.car FAQ (Part 1/5) Ian D. Bjorhovde Car Audio 0 March 6th 04 07:54 AM
FS: SOUNDSTREAM CLOSEOUTS AND MORE!! Nexxon Car Audio 0 November 21st 03 03:59 AM


All times are GMT +1. The time now is 09:06 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"