Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
PUNCH RECORD PROBLEMS
Pro Tools 6.4
WIndows XP, Service Pack2 Pro Tools Reference Guide.pdf - page 164 - discusses punch recording in pro tools. I select the area, set my start and end points, enable recording on my track and record... works fine.. just one BIG problem. .... the recording loops! I want to record that second and then have it most past it to the end point.. if it loops it will quickly record over what I've laid down. Any help would be greatly appreciated. Jason |
#2
Posted to rec.audio.pro
|
|||
|
|||
PUNCH RECORD PROBLEMS
On Mar 16, 3:30 pm, "JasonDamianUs" wrote:
Pro Tools 6.4 WIndows XP, Service Pack2 Sorry to answer my own post..... but after looking around in the menus, I found Operations - Loop Record... turned this off and Problem solved. Duh.. Deepest apologies .... Jason Pro Tools Reference Guide.pdf - page 164 - discusses punch recording in pro tools. I select the area, set my start and end points, enable recording on my track and record... works fine.. just one BIG problem. .... the recording loops! I want to record that second and then have it most past it to the end point.. if it loops it will quickly record over what I've laid down. Any help would be greatly appreciated. Jason |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cooledit - Loop record with punch in? | Pro Audio | |||
Logic Express 6.4: punch-in? | Pro Audio | |||
Does anybody here record drums one by one for more punch | Pro Audio | |||
3M 79 punch in question | Pro Audio | |||
RockfordFosgate Punch HX2 | Car Audio |