Reply
 
Thread Tools Display Modes
  #1   Report Post  
Mark Zarella
 
Posts: n/a
Default FA: Power supply for car computer (12v)

http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=36 70&
rd=1

Computer Power Supply

12v input (for car use)

8-16vdc input

AT output connections

12v remote turn-on - great for car applications

Standard size

Binding post power connections

100% equipped "NIPPON CHEMI-CON" super high reliability Aluminum Electronic
Capacitors

60KHz Switching Frequency Control IC inside

High precision and stable DC outputs for long term operation

+12v peak current: 4A

+5v output current: 5A

+12v output current: 2A

-5v output current: 0.3A

-12v output current: 0.5A

The peak to peak ripple and noise for +5V is less than 50mV. As for the
other outputs are less than 100mV.

The output line regulation for +5V is less than +/-1%, for +12V is less than
+/-2%, for -12V and -5V is less than +/0-3% while measuring at rated loading
and +/-10% of input voltage changing.

The built-in over voltage protection circuit will shut down the outputs to
prevent damaging external circuits. The trip point of crowbar circuit is
around 5.7V to 7.0V. The power supply will go into hiccup mode against short
circuit or over load conditions, and will auto recover while faulty
conditions are removed.

The efficiency is higher than 73% by measuring at nominal line and rated
load.

Add actual shipping charges from NY (under $10 for cont US)

email: zarellam at twcny dot rr dot com


  #2   Report Post  
DJ TecThreat
 
Posts: n/a
Default Power supply for car computer (12v)

thats pretty sweet, when i made my car-puter i had to make my own P.S. for
the system.. Pre-made makes things a helluva lot easier..

DJ TecThreat

"Mark Zarella" wrote in message
...

http://cgi.ebay.com/ws/eBayISAPI.dll...tegory=36 70&
rd=1

Computer Power Supply

12v input (for car use)

8-16vdc input

AT output connections

12v remote turn-on - great for car applications

Standard size

Binding post power connections

100% equipped "NIPPON CHEMI-CON" super high reliability Aluminum

Electronic
Capacitors

60KHz Switching Frequency Control IC inside

High precision and stable DC outputs for long term operation

+12v peak current: 4A

+5v output current: 5A

+12v output current: 2A

-5v output current: 0.3A

-12v output current: 0.5A

The peak to peak ripple and noise for +5V is less than 50mV. As for the
other outputs are less than 100mV.

The output line regulation for +5V is less than +/-1%, for +12V is less

than
+/-2%, for -12V and -5V is less than +/0-3% while measuring at rated

loading
and +/-10% of input voltage changing.

The built-in over voltage protection circuit will shut down the outputs to
prevent damaging external circuits. The trip point of crowbar circuit is
around 5.7V to 7.0V. The power supply will go into hiccup mode against

short
circuit or over load conditions, and will auto recover while faulty
conditions are removed.

The efficiency is higher than 73% by measuring at nominal line and rated
load.

Add actual shipping charges from NY (under $10 for cont US)

email: zarellam at twcny dot rr dot com




Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
WTB: PS AUDIO M-250 power supply, HCPS power supply TUBELOVER General 0 April 2nd 04 06:45 AM
FS: 3000 watt amp $179!! 900 watt woofers $36!! new- free shipping Nexxon General 1 October 14th 03 02:06 PM
2 or 4 ohms?? SeaN Car Audio 49 August 25th 03 01:11 AM
bridging a 4channel to 1 or sending 2 channels of power to one mono source? SmilingSinner Car Audio 1 July 19th 03 10:08 PM
FA: Complete Car Computer - MP3, WMA, GPS, Auto PC Victor Car Audio 0 July 12th 03 05:32 AM


All times are GMT +1. The time now is 09:57 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"