Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Spike "recepticles" for HW floors?
Hey all,
My speakers came with spiked feet (not my choice for "tweak" reasons, it's just what the Infinity Overture 1 stands came with), and I'm moving into a new place with hardwood floors. I don't want to scratch the floors and I've seen "spike recepticles" but I haven't been able to find a price for them. e.g. http://solen.ca/pics/101030a.jpg Does anyone know how much I could expect to pay for them? If they're too expensive (like more than $1 each), I'll probably just stack a few coins up below the spikes. -alan -- Alan Hoyle - - http://www.alanhoyle.com/ "I don't want the world, I just want your half." -TMBG Get Horizontal, Play Ultimate. |
#2
|
|||
|
|||
My local high-end store sells small plastic receptacles for $4 per
unit. They are made of extremely hard plastic designed to dissipate the force. Coins made end up making small circles in your floor. Good luck! |
#3
|
|||
|
|||
Alan Hoyle writes:
I'll probably just stack a few coins up below the spikes. We wound up going with some clear plastic round "glides". They're about an inch and half in diameter, and each glide can be rotated such that it's nearly hidden beneath the speaker stand. Rather than centering the spike in the flat cup area, I've pushed it all the way against the edge. Here's a picture¹ of something similar. The pictured item is larger in diameter and the ridge is higher and wider than mine at home. I think we picked them up at Home Depot and must have paid no more than ten dollars for eight of them. Footnotes: ¹ http://www.vandykes.com/product/02003742/ -- Steven E. Harris |
#4
|
|||
|
|||
Are they removable, some screw into the base. Any old thing to go between
the them and the floor should do, go to the hardware store and get ssome ideas using the fastener sections as sources. Poker chips? Hey all, My speakers came with spiked feet (not my choice for "tweak" reasons, it's just what the Infinity Overture 1 stands came with), and I'm moving into a new place with hardwood floors. I don't want to scratch the floors and I've seen "spike recepticles" but I haven't been able to find a price for them. e.g. http://solen.ca/pics/101030a.jpg Does anyone know how much I could expect to pay for them? If they're too expensive (like more than $1 each), I'll probably just stack a few coins up below the spikes. -alan -- Alan Hoyle - - http://www.alanhoyle.com/ "I don't want the world, I just want your half." -TMBG Get Horizontal, Play Ultimate. |
#7
|
|||
|
|||
I believe www.madisound.com sells spikes and receptacles. But another
idea is just to remove the spikes and use self adhesive felt pads -- those are on the bottom of practically everything in my house. |
#8
|
|||
|
|||
On 12 Jan 2005 01:11:42 GMT, Steven E. Harris wrote:
Alan Hoyle writes: I'll probably just stack a few coins up below the spikes. We wound up going with some clear plastic round "glides". They're about an inch and half in diameter, and each glide can be rotated such that it's nearly hidden beneath the speaker stand. Rather than centering the spike in the flat cup area, I've pushed it all the way against the edge. Here's a picture?? of something similar. The pictured item is larger in diameter and the ridge is higher and wider than mine at home. I think we picked them up at Home Depot and must have paid no more than ten dollars for eight of them. Footnotes: ?? http://www.vandykes.com/product/02003742/ Thanks for the suggestion. I went to a local hardware store and paid $4 total for 8 plastic floor protectors. I'd been a little afraid they wouldn't be able to support the speakers without cracking, but they seem tough enough now that I've actually tried it out. One of my local high end stores wasn't interested enough in me to call me back, and the other would have charged me $10 each for "custom" metal ones. -alan -- Alan Hoyle - - http://www.alanhoyle.com/ "I don't want the world, I just want your half." -TMBG Get Horizontal, Play Ultimate. |
#9
|
|||
|
|||
On 13 Jan 2005 01:06:32 GMT, Wylie Williams wrote:
You wrote "If they're too expensive (like more than $1 each)" There are purpose made metal ones, but they will be more than $1 each. Try a hardware store for the cushions that go under the legs of a couch or chair. They will fall in the price range you mention. By the way, Solen.ca finally got back to me and they would have charged a somewhat reasonable $1.65 (USD) + $5 shipping. -alan -- Alan Hoyle - - http://www.alanhoyle.com/ "I don't want the world, I just want your half." -TMBG Get Horizontal, Play Ultimate. |
#11
|
|||
|
|||
On 16 Jan 2005 16:28:43 GMT, wrote:
I believe www.madisound.com sells spikes and receptacles. But another idea is just to remove the spikes and use self adhesive felt pads -- those are on the bottom of practically everything in my house. Unfortunately, I can't do this with my stands as they're not conventional platform stands. I have the Infinity-brand Overture 1 stands, and if the spikes are removed, they aren't stable. -alan -- Alan Hoyle - - http://www.alanhoyle.com/ "I don't want the world, I just want your half." -TMBG Get Horizontal, Play Ultimate. |
#12
|
|||
|
|||
Aha, then you need Threaded Leveling Feet. Go to www.mcmaster.com and
do a search on "feet." They have several pages, including ones that swivel. You just need to match the screw thread diameter and pitch, which you can find out by taking one of your spikes to the hardware store. Your other option is to put the spikes on small blocks of plywood, and press down real hard. This will effectively self-adjust your speaker stands to the floor. Steven E. Harris wrote: writes: But another idea is just to remove the spikes and use self adhesive felt pads I had considered that, as the spikes seem useless sitting on a rigid surface, but one then loses the ability to level the stands by adjusting the individual threaded spikes. My floors, despite having been newly laid, required leveling to keep the stands from rocking. -- Steven E. Harris |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mackie Spike and Eurorack | Pro Audio | |||
Mackie Spike, 4 inputs? | Pro Audio | |||
Mackie Spike vs Mbox | Pro Audio | |||
Help needed HOW TO - SPIKE MIKE | Tech | |||
Spike Lee says rap is dangerous | Pro Audio |