Home |
Search |
Today's Posts |
#1
Posted to rec.audio.car
|
|||
|
|||
Small amp big power?
Hey gang.
My beloved ESX Q1204 needs replacing as I am needing my trunk space back and want to move to a smaller, simpler system design. Plan is for an 8" SQ in a sealed box under one front seat and a four channel amp under the other. Would like to have as much power (clean, for SQ) as possible out of a minimum size. I know it doesn't really work that way. Given a footprint no larger than 11"x11", do any powerful four-channel amps spring to mind? Thanks. |
#2
Posted to rec.audio.car
|
|||
|
|||
Small amp big power?
steer writes:
: Hey gang. : My beloved ESX Q1204 needs replacing as I am needing my trunk space back : and want to move to a smaller, simpler system design. Decided on the Alpine PDX 4.150 to run CDT HD 6.5" deperates and a CDT EF-8. Read a few reviews that the amp gets hot when run for long period of time (my commute time is long). Anyone see a problem with me running the amp with the cover off and a fan on it? |
#3
Posted to rec.audio.car
|
|||
|
|||
Small amp big power?
steer wrote:
steer writes: : Hey gang. : My beloved ESX Q1204 needs replacing as I am needing my trunk space back : and want to move to a smaller, simpler system design. Decided on the Alpine PDX 4.150 to run CDT HD 6.5" deperates and a CDT EF-8. Read a few reviews that the amp gets hot when run for long period of time (my commute time is long). Anyone see a problem with me running the amp with the cover off and a fan on it? I would be real weary about removing any covers to install a fan because the cover you remove may actually be a functional heat transfer cover (i.e. heatsink) and you do not want to do that. One thing I did back in the good old days when I had an original Punch 150 that overheated was to make a shroud with 2 120mm 12 volt fans to push and pull air over the amp. The shroud was made out of aluminum and it worked rather well. Then again, in your situation, you probably are not looking to ADD additional stuff that takes up space. If you find your amp is getting too hot and shutting off, you could always try adding a fan that blows air across the top of it. Anything that helps to circulate that dissipated heat is better than nothing at all! |
#4
Posted to rec.audio.car
|
|||
|
|||
Small amp big power?
In article , DJ NoMore wrote:
steer wrote: steer writes: : Hey gang. : My beloved ESX Q1204 needs replacing as I am needing my trunk space back : and want to move to a smaller, simpler system design. Decided on the Alpine PDX 4.150 to run CDT HD 6.5" deperates and a CDT EF-8. Read a few reviews that the amp gets hot when run for long period of time (my commute time is long). Anyone see a problem with me running the amp with the cover off and a fan on it? I would be real weary about removing any covers to install a fan because the cover you remove may actually be a functional heat transfer cover (i.e. heatsink) and you do not want to do that. One thing I did back in the good old days when I had an original Punch 150 that overheated was to make a shroud with 2 120mm 12 volt fans to push and pull air over the amp. The shroud was made out of aluminum and it worked rather well. Then again, in your situation, you probably are not looking to ADD additional stuff that takes up space. If you find your amp is getting too hot and shutting off, you could always try adding a fan that blows air across the top of it. Anything that helps to circulate that dissipated heat is better than nothing at all! If the shroud is too much, what i do some time is just mount a fan on the case. It can be glued or velcroed so the fan blows down on the case or sink, just like a CPU fan. Just need some spacers. greg |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How small can you get ? | Vacuum Tubes | |||
Small power amp hum. | Pro Audio | |||
Advice: Physically small power amplifier for use with Ipod dock. | Tech | |||
Small Amp | Car Audio | |||
Power transformers for small tube projects | Vacuum Tubes |