Home |
Search |
Today's Posts |
#1
Posted to rec.audio.car
|
|||
|
|||
97 Volvo 850 Double DIN mounting
Does anyone know if there are pre-fabed aftermarket brackets to mount a
double DIN radio into a '97 Volvo 850? I know there are single DIN mounts available with a pocket but I wanted to use all the opening for AVIC-Z1. There is a rail for the factory radio to slide on in the middle of the opening that would prevent a double DIN unit from sliding in. Thanks in advance Pete |
#2
Posted to rec.audio.car
|
|||
|
|||
97 Volvo 850 Double DIN mounting
On Oct 23, 4:59 am, "Peter Sperandio" wrote:
Does anyone know if there are pre-fabed aftermarket brackets to mount a double DIN radio into a '97 Volvo 850? Does the factory stereo have a removable metal bracket attached to each side? If so, you should be able to take that brack and use the same mounting holes to attach it to the sides of your aftermarket radio. As far as trimming-out the rest, you might very well be left with no option other than to custom-make something. But if your opening is truly double-DIN, you shouldn't really even have much extra room around the dash trim. -dan |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
rec.audio.car FREQUENTLY ASKED QUESTIONS (caution, this is HUGE) | Car Audio | |||
Need Suggestion of Radio/Audio Mounting Kit for 1996 PathFinder | Car Audio | |||
List of NOS mostly tubes | Vacuum Tubes | |||
What size of subs could I reasonably put iin a 92 Volvo 960 sedan? | Car Audio | |||
Philips EL86 SEPP OTL Double Chokes Information | Vacuum Tubes |