Hi all,

Today I hooked up my FireBox to my mixer, wanting to record 4 channels. The
main outputs are connected to the FireBox inputs 1 and 2 at the front, the
sub outputs are connected to line in 3 and 4 at the back of the FireBox.
Since inputs 1 and 2 have level controls, I can easily set the 0dB level at
the mixer to correspond to -10dB in Cubase. But inputs 3 and 4 at the
FireBox are fixed and show -17dB in Cubase when the level at the mixer is
0dB. I know I'm loosing "only" 3 bits here but I was wondering what others
have done about this (if at all).

Meindert