Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tech
|
|||
|
|||
Kenwood 6060A Lab Scope problem
If any of you are familiar with this unit, your help would be greatly
appreciated. I don't have a service manual for it. The Focus knob is unresponsive on it. Unit seems to work fine otherwise. I am going to check the focus pot and the electrolytic caps in it. Any other ideas? Clark |
#2
Posted to rec.audio.tech
|
|||
|
|||
Kenwood 6060A Lab Scope problem
wrote in message oups.com... ** Groper alert ... If any of you are familiar with this unit, your help would be greatly appreciated. I don't have a service manual for it. The Focus knob is unresponsive on it. Unit seems to work fine otherwise. I am going to check the focus pot and the electrolytic caps in it. Any other ideas? ** Check any high value resistors ( 100 kohms or more) connected to the focus pot. Bet one of them has gone very high or open circuit. ......... Phil |
#3
Posted to rec.audio.tech
|
|||
|
|||
Kenwood 6060A Lab Scope problem
Thanks. I'll check them.
|
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Kenwood KDC-MP922 problem | Car Audio | |||
Some Recording Techniques | Pro Audio | |||
CLC: More | Vacuum Tubes | |||
Kenwood KDC-MP919 Problem.... | Car Audio | |||
INSTALLATION PROBLEM: Kenwood 515-S | Car Audio |