Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tech
|
|||
|
|||
Help with power amp...
Dear Group...
I repaired one power DENON amplifier (about 2 x 200 Watts) Everything is OK, but if I turn the volume on higher level (both channels) - I have hum. If turn every channel separate (on preamp balance) - there is no problem. Problem is present only when you drive both - left and right channels, or if you switch off the light in room. Funny ? How repair this problem Thanks Boris |
#2
Posted to rec.audio.tech
|
|||
|
|||
Help with power amp...
nb wrote:
Dear Group... I repaired one power DENON amplifier (about 2 x 200 Watts) Everything is OK, but if I turn the volume on higher level (both channels) - I have hum. If turn every channel separate (on preamp balance) - there is no problem. Problem is present only when you drive both - left and right channels, or if you switch off the light in room. Funny ? How repair this problem Thanks Boris replace lamp dimer with standard switch? |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
I did not kill my power amp | Pro Audio | |||
KISS 113 by Andre Jute | Vacuum Tubes | |||
here is how firewire ports fail | Pro Audio | |||
List of NOS mostly tubes | Vacuum Tubes | |||
FS: SOUNDSTREAM CLOSEOUTS AND MORE!! | Car Audio |