Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Amp doing wierd things....please help....
Friend has a clarion amp....running 2 - 10" jl w3 subs.... Here is the problem... The external fuse on the amp (40A fuse i think) blew, and the power wire fuse, at the battery, is also blowing on us (60 A i think). We replaced both fuses after inspecting all of the power wire, and the ground wire. Now the subs wont pound.....they dont move at all.... THe green power light on the amp, blinks ON once every 20-25 seconds. Oddly enough, his head lights will go Bright every 20-25 seconds also... AND his battery dial in his instrument cluster will flicker back and forth every 20-25 seconds also. any ideas??? thanks |
#2
|
|||
|
|||
Amp doing wierd things....please help....
Sounds like there is a fault somewhere, possibly inside his amp, and it's
causing the protection circuits to cycle on and off. "notreal" wrote in message ... Friend has a clarion amp....running 2 - 10" jl w3 subs.... Here is the problem... The external fuse on the amp (40A fuse i think) blew, and the power wire fuse, at the battery, is also blowing on us (60 A i think). We replaced both fuses after inspecting all of the power wire, and the ground wire. Now the subs wont pound.....they dont move at all.... THe green power light on the amp, blinks ON once every 20-25 seconds. Oddly enough, his head lights will go Bright every 20-25 seconds also... AND his battery dial in his instrument cluster will flicker back and forth every 20-25 seconds also. any ideas??? thanks |
#3
|
|||
|
|||
Amp doing wierd things....please help....
"notreal" wrote in message ... Friend has a clarion amp....running 2 - 10" jl w3 subs.... Here is the problem... The external fuse on the amp (40A fuse i think) blew, and the power wire fuse, at the battery, is also blowing on us (60 A i think). We replaced both fuses after inspecting all of the power wire, and the ground wire. Now the subs wont pound.....they dont move at all.... THe green power light on the amp, blinks ON once every 20-25 seconds. Oddly enough, his head lights will go Bright every 20-25 seconds also... AND his battery dial in his instrument cluster will flicker back and forth every 20-25 seconds also. any ideas??? thanks Amp has shorted finals or a shorted FET in the power supply, don't try it anymore and take it to a tech. There is a fellow around here under the name ampdoc. My bench is full and I'm getting ready to leave on tour next week. Parts are common and fairly inexpensive, FETs can ge pricey though. The dimming of the lights is the amp pulling HUGE current when it tries to come out of initial protect, It senses fault as soon as it comes on and draws huge current then cycles thouugh the turn on sequence. Chad |
#4
|
|||
|
|||
Amp doing wierd things....please help....
Thanks dude
i appreciate that On Fri, 21 May 2004 08:22:28 -0500, "Chad Wahls" wrote: "notreal" wrote in message .. . Friend has a clarion amp....running 2 - 10" jl w3 subs.... Here is the problem... The external fuse on the amp (40A fuse i think) blew, and the power wire fuse, at the battery, is also blowing on us (60 A i think). We replaced both fuses after inspecting all of the power wire, and the ground wire. Now the subs wont pound.....they dont move at all.... THe green power light on the amp, blinks ON once every 20-25 seconds. Oddly enough, his head lights will go Bright every 20-25 seconds also... AND his battery dial in his instrument cluster will flicker back and forth every 20-25 seconds also. any ideas??? thanks Amp has shorted finals or a shorted FET in the power supply, don't try it anymore and take it to a tech. There is a fellow around here under the name ampdoc. My bench is full and I'm getting ready to leave on tour next week. Parts are common and fairly inexpensive, FETs can ge pricey though. The dimming of the lights is the amp pulling HUGE current when it tries to come out of initial protect, It senses fault as soon as it comes on and draws huge current then cycles thouugh the turn on sequence. Chad |
#5
|
|||
|
|||
Amp doing wierd things....please help....
It's most likely shorted finals, if the power supply was damaged (FET's
shorted), then it'd pull current whether on or off. If you want me to look at it the shop's checkout fee is $15.00, be sure to include a note with information on the problem you are having and how to contact you. Usual repair on shorted finals is around $65 or so, but it depends on parts cost. We do call with an estimate before repair. We are a Authorized Service Company for Pioneer, JVC, and Sony as well as for many Home audio & video Mfr's . -- Jammy Harbin J & J Electronics, Inc. 227 S. 4th St. Selmer, TN 38375 731-645-3311 "Chad Wahls" wrote in message ... "notreal" wrote in message ... Friend has a clarion amp....running 2 - 10" jl w3 subs.... Here is the problem... The external fuse on the amp (40A fuse i think) blew, and the power wire fuse, at the battery, is also blowing on us (60 A i think). We replaced both fuses after inspecting all of the power wire, and the ground wire. Now the subs wont pound.....they dont move at all.... THe green power light on the amp, blinks ON once every 20-25 seconds. Oddly enough, his head lights will go Bright every 20-25 seconds also... AND his battery dial in his instrument cluster will flicker back and forth every 20-25 seconds also. any ideas??? thanks Amp has shorted finals or a shorted FET in the power supply, don't try it anymore and take it to a tech. There is a fellow around here under the name ampdoc. My bench is full and I'm getting ready to leave on tour next week. Parts are common and fairly inexpensive, FETs can ge pricey though. The dimming of the lights is the amp pulling HUGE current when it tries to come out of initial protect, It senses fault as soon as it comes on and draws huge current then cycles thouugh the turn on sequence. Chad |
#6
|
|||
|
|||
Amp doing wierd things....please help....
Of course, the original cause of the problem has yet to be identified.
Probably shorted wiring or somesuch. "notreal" wrote in message ... Friend has a clarion amp....running 2 - 10" jl w3 subs.... Here is the problem... The external fuse on the amp (40A fuse i think) blew, and the power wire fuse, at the battery, is also blowing on us (60 A i think). We replaced both fuses after inspecting all of the power wire, and the ground wire. Now the subs wont pound.....they dont move at all.... THe green power light on the amp, blinks ON once every 20-25 seconds. Oddly enough, his head lights will go Bright every 20-25 seconds also... AND his battery dial in his instrument cluster will flicker back and forth every 20-25 seconds also. any ideas??? thanks |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Questions about "the usual way of hooking things up" | Car Audio | |||
- Need Help Connecting Things | General | |||
Dynamat Passat | Car Audio | |||
Couple Of Things For Sale. | Car Audio |