Home |
Search |
Today's Posts |
#1
|
|||
|
|||
simply a speaker problem- Z-340 Logitech
If this is not the right board for this type of question, sorry!
I recently contacted Customer Support via e-mail. I am waiting for their reply, but while they do that, I will post the problem I have to this board to see of some of you can help out. Logitech CS, I have the Z-340 Logitech speakers. Naturally enough, it has 2 speakers. This is fine except for the fact that one of them doesn't play music! The main speaker with the controls play, and the subwoofer works, but it is obvious that the other speaker doesn't work. When I turn on my microphone though, it sends what I say to that speaker, basically making it an amplifier. I have seen this problem before (if it is a problem), and didn't know how to fix it. When the microphone is turned off, the 'dead' speaker just emits a faint buzzing noise. Is there a way to fix this? Or is it not a problem? Andrew That is my condensed version of the problem. If anybody else has had this problem before, can you respond and help a poor music wanting guy out? Andrew |
#2
|
|||
|
|||
simply a speaker problem- Z-340 Logitech
android wrote:
If this is not the right board for this type of question, sorry! I recently contacted Customer Support via e-mail. I am waiting for their reply, but while they do that, I will post the problem I have to this board to see of some of you can help out. Logitech CS, I have the Z-340 Logitech speakers. Naturally enough, it has 2 speakers. This is fine except for the fact that one of them doesn't play music! The main speaker with the controls play, and the subwoofer works, but it is obvious that the other speaker doesn't work. When I turn on my microphone though, it sends what I say to that speaker, basically making it an amplifier. I have seen this problem before (if it is a problem), and didn't know how to fix it. When the microphone is turned off, the 'dead' speaker just emits a faint buzzing noise. Is there a way to fix this? Or is it not a problem? Andrew If the so-called dead speaker emits a buzzing noise, it is not truly dead. Whatever is dead is upstream of both the speaker itself. Is the signal plug fully pushed into the socket on the PC? |
#3
|
|||
|
|||
simply a speaker problem- Z-340 Logitech
android wrote:
If this is not the right board for this type of question, sorry! I recently contacted Customer Support via e-mail. I am waiting for their reply, but while they do that, I will post the problem I have to this board to see of some of you can help out. Logitech CS, I have the Z-340 Logitech speakers. Naturally enough, it has 2 speakers. This is fine except for the fact that one of them doesn't play music! The main speaker with the controls play, and the subwoofer works, but it is obvious that the other speaker doesn't work. When I turn on my microphone though, it sends what I say to that speaker, basically making it an amplifier. I have seen this problem before (if it is a problem), and didn't know how to fix it. When the microphone is turned off, the 'dead' speaker just emits a faint buzzing noise. Is there a way to fix this? Or is it not a problem? Andrew If the so-called dead speaker emits a buzzing noise, it is not truly dead. Whatever is dead is upstream of both the speaker itself. Is the signal plug fully pushed into the socket on the PC? |
#4
|
|||
|
|||
simply a speaker problem- Z-340 Logitech
android wrote:
If this is not the right board for this type of question, sorry! I recently contacted Customer Support via e-mail. I am waiting for their reply, but while they do that, I will post the problem I have to this board to see of some of you can help out. Logitech CS, I have the Z-340 Logitech speakers. Naturally enough, it has 2 speakers. This is fine except for the fact that one of them doesn't play music! The main speaker with the controls play, and the subwoofer works, but it is obvious that the other speaker doesn't work. When I turn on my microphone though, it sends what I say to that speaker, basically making it an amplifier. I have seen this problem before (if it is a problem), and didn't know how to fix it. When the microphone is turned off, the 'dead' speaker just emits a faint buzzing noise. Is there a way to fix this? Or is it not a problem? Andrew If the so-called dead speaker emits a buzzing noise, it is not truly dead. Whatever is dead is upstream of both the speaker itself. Is the signal plug fully pushed into the socket on the PC? |
#5
|
|||
|
|||
simply a speaker problem- Z-340 Logitech
android wrote:
If this is not the right board for this type of question, sorry! I recently contacted Customer Support via e-mail. I am waiting for their reply, but while they do that, I will post the problem I have to this board to see of some of you can help out. Logitech CS, I have the Z-340 Logitech speakers. Naturally enough, it has 2 speakers. This is fine except for the fact that one of them doesn't play music! The main speaker with the controls play, and the subwoofer works, but it is obvious that the other speaker doesn't work. When I turn on my microphone though, it sends what I say to that speaker, basically making it an amplifier. I have seen this problem before (if it is a problem), and didn't know how to fix it. When the microphone is turned off, the 'dead' speaker just emits a faint buzzing noise. Is there a way to fix this? Or is it not a problem? Andrew If the so-called dead speaker emits a buzzing noise, it is not truly dead. Whatever is dead is upstream of both the speaker itself. Is the signal plug fully pushed into the socket on the PC? |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bose 901 Review | General | |||
Hello, Speaker workshop questions... | High End Audio | |||
Hello, Speaker workshop questions... | High End Audio | |||
fitting speaker problem... | Car Audio | |||
Speaker Wiring affects phase relationships | Car Audio |