Home |
Search |
Today's Posts |
#1
|
|||
|
|||
wiring a used DVA-5205 to test?
I received a couple months ago, a used Alpine DVA-5205 w/o any wiring
harness or anything. The company I ordered the parts from took until today to get them to me because the stuff was on backorder. I've looked at the DVA-5205 installation manual online, and before I start changing things up in the car, I want to make sure this thing works... I've tried wiring up the Gnd, Batt, Acc, Remote In wires to my 12V power supply that I usually use to test equipment and it doesnt do a THING. Does it absolutely need the Ai-Net connection to work? I just want to make sure it powers up, etc. (I connected the Gnd to 12- and all 3 (Batt, Acc, Remote In) to 12+) I did try taking it out to the car and wire it up to the Ai-Net between my HU (CDA-7850) and the CD shuttle and then supply 12+ to the Remote In like one of the wiring diagrams suggested but still nothing..... I'm just trying to hook this up to my CDA-7850 (still no display, working on getting a TME-M760) and the remote didnt do anything either (altho it works beautifully w/ my HU when i switch it to "AUDIO" from "DVD" - Mobster75! |
#2
|
|||
|
|||
wiring a used DVA-5205 to test?
It's broke... you don't need the ai-net cable for it to power up.
Robert Drake wrote in message om... I received a couple months ago, a used Alpine DVA-5205 w/o any wiring harness or anything. The company I ordered the parts from took until today to get them to me because the stuff was on backorder. I've looked at the DVA-5205 installation manual online, and before I start changing things up in the car, I want to make sure this thing works... I've tried wiring up the Gnd, Batt, Acc, Remote In wires to my 12V power supply that I usually use to test equipment and it doesnt do a THING. Does it absolutely need the Ai-Net connection to work? I just want to make sure it powers up, etc. (I connected the Gnd to 12- and all 3 (Batt, Acc, Remote In) to 12+) I did try taking it out to the car and wire it up to the Ai-Net between my HU (CDA-7850) and the CD shuttle and then supply 12+ to the Remote In like one of the wiring diagrams suggested but still nothing..... I'm just trying to hook this up to my CDA-7850 (still no display, working on getting a TME-M760) and the remote didnt do anything either (altho it works beautifully w/ my HU when i switch it to "AUDIO" from "DVD" - Mobster75! |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Wiring for component "drawers"? | General | |||
Pro-Audio Test CD | General | |||
Public Listening Test at 64 kbs | General | |||
Public 128 kbit/s Extension Test | General | |||
Autosound 2000 Test Discs | Car Audio |