Home |
Search |
Today's Posts |
#41
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
PanHandler wrote: "Pooh Bear" wrote in message ... You'll be surprised how quiet it'll be outside. I had the outfit there last weekend, but it poured all day and with the wind and rain it was too noisy and wet to spend much time with it. The few minutes it ran, it seemed OK in terms of SPL. Outdoors the SPL drops off very fast at any distance fom the speakers. Graham |
#42
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
GregS wrote: In article , Pooh Bear wrote: "Mr.T" wrote: "David Nebenzahl" wrote in message .com... My next experiment will be to parallel a couple good batteries and see what it's really made of. Since that won't increase the voltage it will accomplish very litle. Since it will increase the *current* it ought to accomplish something, no? If the present battery can't supply sufficient current, yes. Since car batteries are good for 100s of amps whilst cranking, I think the advantage of 2 in parallel will be limited. Having more battery gives longer life since a lower discharge rate has a higher return efficiency. Its also easier on the battery supporting longer life. Perfectly true but I don't see it resulting in more power output. Graham |
#43
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
"Pooh Bear" wrote ...
PanHandler wrote: "Pooh Bear" wrote ... You'll be surprised how quiet it'll be outside. I had the outfit there last weekend, but it poured all day and with the wind and rain it was too noisy and wet to spend much time with it. The few minutes it ran, it seemed OK in terms of SPL. Outdoors the SPL drops off very fast at any distance fom the speakers. The inverse-square law is uniform inside and outside, is it not? Perhaps the difference we percieve is that there are virtually NO reinforcing reflections (from walls, ceilings, etc.) when outdoors. Only reflections I recall from outdoors are nasty slap-echoes from mid-distant buildings when you don't want them. :-( OTOH, when they blast fireworks over the Willamette river through the middle of PDX, the slap echoes from the downtown buildings is pretty entertaining! :-) |
#44
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
Richard Crowley wrote: "Pooh Bear" wrote ... PanHandler wrote: "Pooh Bear" wrote ... You'll be surprised how quiet it'll be outside. I had the outfit there last weekend, but it poured all day and with the wind and rain it was too noisy and wet to spend much time with it. The few minutes it ran, it seemed OK in terms of SPL. Outdoors the SPL drops off very fast at any distance fom the speakers. The inverse-square law is uniform inside and outside, is it not? Perhaps the difference we percieve is that there are virtually NO reinforcing reflections (from walls, ceilings, etc.) when outdoors. Indoors, you the SPL doesn't drop off that fast due indeed to reflections ( or call it ambience if you like ). Also consider the smaller volume that's involved. Graham |
#45
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
In article , Pooh Bear wrote:
PanHandler wrote: "Pooh Bear" wrote in message ... When it's on the power supply do you see the output voltage drop when it's loud Good morning Graham. I don't see any wavering on the PS volt meter, which I set at 13.8 V. I'm not an electronics whiz, but I'd *ass*umed the PS would maintain the setting; otherwise why provide for adjustment? It would drop if you drew more than it's 35 Amps though. It would 'run out of regulation'. Since that's not happening you can be sure that the DC input power does not exceed 483 W. Using a typical figure for Class B efficiency that transaltes to 300W peak of audio output. You really don't know wht the spec is. Its 35 amps so it does not burn up. And then there should also be a peak amps capability which is not the same as its max rating. There is also a continuous rating which is a safe heating value. greg |
#46
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
In article , Pooh Bear wrote:
PanHandler wrote: "Pooh Bear" wrote in message ... You'll be surprised how quiet it'll be outside. I had the outfit there last weekend, but it poured all day and with the wind and rain it was too noisy and wet to spend much time with it. The few minutes it ran, it seemed OK in terms of SPL. Outdoors the SPL drops off very fast at any distance fom the speakers. Very true, allthough most of the time your next to a building which reinforces. At a picnic, I try to place the speakers a good distance away from most of the people, so loudness does not vary as much as if the speakers were right near some people. greg |
#47
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
In article , Pooh Bear wrote:
GregS wrote: In article , Pooh Bear wrote: "Mr.T" wrote: "David Nebenzahl" wrote in message .com... My next experiment will be to parallel a couple good batteries and see what it's really made of. Since that won't increase the voltage it will accomplish very litle. Since it will increase the *current* it ought to accomplish something, no? If the present battery can't supply sufficient current, yes. Since car batteries are good for 100s of amps whilst cranking, I think the advantage of 2 in parallel will be limited. Having more battery gives longer life since a lower discharge rate has a higher return efficiency. Its also easier on the battery supporting longer life. Perfectly true but I don't see it resulting in more power output. If the battery is dead, its going to matter!! greg |
#48
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
"Pooh Bear" wrote in message ... Outdoors the SPL drops off very fast at any distance fom the speakers. I noticed that; 10-15 feet made a good difference. Not much reflectivity. |
#49
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
PanHandler wrote: "Pooh Bear" wrote in message ... Outdoors the SPL drops off very fast at any distance fom the speakers. I noticed that; 10-15 feet made a good difference. Not much reflectivity. Exactly. You got it. Graham |
#50
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
GregS wrote: At a picnic, I try to place the speakers a good distance away from most of the people, so loudness does not vary as much as if the speakers were right near some people. I can't make any sense of that I'm afraid. Why does being " away from most of the people " make any difference ? Graham |
#51
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
GregS wrote: In article , Pooh Bear wrote: PanHandler wrote: "Pooh Bear" wrote in message ... When it's on the power supply do you see the output voltage drop when it's loud Good morning Graham. I don't see any wavering on the PS volt meter, which I set at 13.8 V. I'm not an electronics whiz, but I'd *ass*umed the PS would maintain the setting; otherwise why provide for adjustment? It would drop if you drew more than it's 35 Amps though. It would 'run out of regulation'. Since that's not happening you can be sure that the DC input power does not exceed 483 W. Using a typical figure for Class B efficiency that transaltes to 300W peak of audio output. You really don't know wht the spec is. I'm going by what's been posted here. Its 35 amps so it does not burn up. And then there should also be a peak amps capability which is not the same as its max rating. On what basis do you say that ? " Quote You really don't know wht the spec is " Unquote There is also a continuous rating which is a safe heating value. That's how a safe value is established, yes. Graham |
#52
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
"Pooh Bear" wrote in message ... Exactly. You got it. I'm getting a lot out of this thread too. Quite edifying. It's restoring many things I had forgotten over the years. I've been messing with audio for more years than care to quote (can you say 'Sears Silvertone'?). A really good friend of 40 years passed away recently; an electronics engineer for Lockheed Magnetics, specializing in audio, and I used to rely on him for advice. I sure miss him. |
#53
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
PanHandler wrote: "Pooh Bear" wrote in message ... Exactly. You got it. I'm getting a lot out of this thread too. I'm pleased to hear that. Every so often you can pick up some really useful info on newsgroups. Quite edifying. It's restoring many things I had forgotten over the years. I've been messing with audio for more years than care to quote (can you say 'Sears Silvertone'?). Doesn't mean anything to me I'm afraid but I'm in the UK. A really good friend of 40 years passed away recently; an electronics engineer for Lockheed Magnetics, specializing in audio, and I used to rely on him for advice. I sure miss him. Sorry to hear of your loss. Graham |
#54
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
Pooh Bear spake thus:
PanHandler wrote: Quite edifying. It's restoring many things I had forgotten over the years. I've been messing with audio for more years than care to quote (can you say 'Sears Silvertone'?). Doesn't mean anything to me I'm afraid but I'm in the UK. Just FYI: Surely you know who Sears Roebuck was, even if you're over there, right? Silvertone was their house brand; mostly crappola, but adequate for the average slob. They had a full line of audio stuff (record players, radios, even tape recorders, I think), plus guitar amps. Not great stuff. -- Any system of knowledge that is capable of listing films in order of use of the word "****" is incapable of writing a good summary and analysis of the Philippine-American War. And vice-versa. This is an inviolable rule. - Matthew White, referring to Wikipedia on his WikiWatch site (http://users.erols.com/mwhite28/wikiwoo.htm) |
#55
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
David Nebenzahl wrote: Pooh Bear spake thus: PanHandler wrote: Quite edifying. It's restoring many things I had forgotten over the years. I've been messing with audio for more years than care to quote (can you say 'Sears Silvertone'?). Doesn't mean anything to me I'm afraid but I'm in the UK. Just FYI: Surely you know who Sears Roebuck was, even if you're over there, right? Ummm... No ! Silvertone was their house brand; mostly crappola, but adequate for the average slob. They had a full line of audio stuff (record players, radios, even tape recorders, I think), plus guitar amps. Not great stuff. Have you heard of Ekco or Pye ? Graham p.s. both companies were involved in the early days of radar too |
#56
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
Pooh Bear spake thus:
David Nebenzahl wrote: Just FYI: Surely you know who Sears Roebuck was, even if you're over there, right? Ummm... No ! Have you heard of Ekco or Pye ? The only Ekco I know of is a company over here that used to make kitchen gadgets and cutlery. Pye? nope. But I'm surprised you don't know about Sears. For decades it was the U.S.'s biggest retailer, with a huge mail-order catalog you could get anything from. (I think in the old days you could actually buy ready-to-assemble houses from them.) I mean, over here, we've even heard of Jessops. -- Any system of knowledge that is capable of listing films in order of use of the word "****" is incapable of writing a good summary and analysis of the Philippine-American War. And vice-versa. This is an inviolable rule. - Matthew White, referring to Wikipedia on his WikiWatch site (http://users.erols.com/mwhite28/wikiwoo.htm) |
#57
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
David Nebenzahl wrote: Pooh Bear spake thus: David Nebenzahl wrote: Just FYI: Surely you know who Sears Roebuck was, even if you're over there, right? Ummm... No ! Have you heard of Ekco or Pye ? The only Ekco I know of is a company over here that used to make kitchen gadgets It was from the company owner's name E K Cole. They made radios, TVs and audio a long, long time ago. and cutlery. Pye? nope. Got absorbed into Philips ultimately. Similar product portfolio to Ekco. But I'm surprised you don't know about Sears. I've heard of Sears but not Roebuck. For decades it was the U.S.'s biggest retailer, with a huge mail-order catalog you could get anything from. (I think in the old days you could actually buy ready-to-assemble houses from them.) But no presence whatever in the UK. OTOH we have Woolworths here. I mean, over here, we've even heard of Jessops. The camera shop ? They are very international now. I recall when they just had one outlet in a big warehouse in Leicester. Some companies ever trade as clones of Jessops with more or less identical shops but with no connection to the real Jessops. Heard of Tesco btw ? The town I live in has the first ever supermarket in the UK ( a Tesco ) and it's now a 'listed building'. Graham |
#58
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
"David Nebenzahl" wrote in message news:4489fb95$0$3681 Just FYI: Surely you know who Sears Roebuck was, even if you're over there, right? Silvertone was their house brand; mostly crappola, but adequate for the average slob. They had a full line of audio stuff (record players, radios, even tape recorders, I think), plus guitar amps. Not great stuff. My first foray into stereo was in '59 I believe. My parents gave me a Silvertone reel-to-reel deck/player. It would record in mono, and play back pre-recorded stereo reels, but with a catch: one channel output consisted only of a preamp - you needed another amp to hear it. The friend I mentioned earlier had one, and we were off to the races. Ping pong effect was the clincher for us. We seperated the speakers as far as we could, probably 20 feet. After all, it was in STEREO! We don't appreciate how well off we are now! |
#59
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
In article , Pooh Bear wrote:
GregS wrote: At a picnic, I try to place the speakers a good distance away from most of the people, so loudness does not vary as much as if the speakers were right near some people. I can't make any sense of that I'm afraid. Why does being " away from most of the people " make any difference ? Its like when DJ'ing, people sit down next to the speaker, then say its TOO LOUD. greg |
#60
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
"GregS" wrote in message ... You really don't know wht the spec is. Its 35 amps so it does not burn up. And then there should also be a peak amps capability which is not the same as its max rating. There is also a continuous rating which is a safe heating value. And if you stick one of those really big "stiffening" capacitors between the supply and the amp, the amp will then be able to draw large peak currents without stressing the capacitors in the power supply quite as much. Jeff -- "They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety" - B. Franklin, Bartlett's Familiar Quotations (1919) |
#61
Posted to rec.audio.tech
|
|||
|
|||
Update: 'Juke' project ( Pics)
In article , "Jeff Findley" wrote:
"GregS" wrote in message ... You really don't know wht the spec is. Its 35 amps so it does not burn up. And then there should also be a peak amps capability which is not the same as its max rating. There is also a continuous rating which is a safe heating value. And if you stick one of those really big "stiffening" capacitors between the supply and the amp, the amp will then be able to draw large peak currents without stressing the capacitors in the power supply quite as much. That usually works as well as using a battery. Some power supplies might not stand reverse flow, but most can. Some supplies cannot supply heavy peak currents without tripping a crowbar type shutdown. I have problems powering lamps with DC regulated power supplies, as the lamps high cold current shuts off the supply. I have had to make modification to some supplies for this reason. Its not redily apparent from reading supply specs as to its behavior. greg |
Reply |
|
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Delta Rebuild Update #1 | Pro Audio | |||
adobe audition: cd tracks, session files, and project view | Pro Audio | |||
The KISS Amp 300B project resumes | Vacuum Tubes | |||
Powerful Argument in Favor of Agnosticism and Athetism | Audio Opinions | |||
"Project Gramophone" discussion group started -- do contribute ... | General |