Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.tubes
Peter Wieck Peter Wieck is offline
external usenet poster
 
Posts: 2,418
Default Scott LK150

This beast is back on the bench for a cleaning and tune-up. The
internal caps have been done long since, it is now about time to
tackle the power-supply properly and cleanly - a task I have postponed
for over a year now as last winter was taken up by the new (old)
house.

Does anyone have the original kit assembly instructions available? I
have a schematic which is clearly not an exact as-built of my unit -
in addition to which a lot of components have no values or polarities
attached. As I am substantially rebuilding the power-supply with all
separate caps, I would really like to be able to have all available
sources of information before I start. Yes, of course I took pictures
and drew out a schematic from what is there - but a belt, suspenders
*and* Velcro is always comforting. And at the same time, full
literature for a component is useful in its own right.

Thanks in advance. I will pay any reasonable costs, of course.

Peter Wieck
Melrose Park, PA
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Hey Scott, what's up ? Eeyore Audio Opinions 26 December 24th 06 11:20 PM
Q for Scott. ScottW Audio Opinions 58 September 7th 04 04:55 AM
Scott, something for you? Sander deWaal Audio Opinions 4 September 3rd 04 02:25 PM
Attention Art, Scott, and Scott... Marc Phillips Audio Opinions 3 August 24th 04 11:49 PM


All times are GMT +1. The time now is 07:47 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"