Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Port firing for Box??
I hope some people can give me some input on this choice. I am going to be
building a new enclosure for my JL 12W7s and I was wondering if it would make a difference if I had the slot ports firing down or to the sides of the vehicle? The ports will have at least 5in clearance and the vehicle is a nissan pathfinder. Please let me know what you guys think. |
#2
|
|||
|
|||
Port firing for Box??
It doesn't matter where the ports are unless the box goes into a car trunk.
Make sure you glue and screw the mdf when assembling. P. "Robert Easton" wrote in message ... I hope some people can give me some input on this choice. I am going to be building a new enclosure for my JL 12W7s and I was wondering if it would make a difference if I had the slot ports firing down or to the sides of the vehicle? The ports will have at least 5in clearance and the vehicle is a nissan pathfinder. Please let me know what you guys think. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
rec.audio.car FAQ (Part 3/5) | Car Audio | |||
port to close to speaker box wall? | Car Audio | |||
IDMAX port question | Car Audio | |||
Convert round port to square port | Car Audio | |||
Subwoofer direction | Car Audio |