Home |
Search |
Today's Posts |
#1
Posted to rec.audio.high-end
|
|||
|
|||
Adcom cooling fan noise
The cooling fans in my Adcom GFA5800 are noisier than
they were last year at similar ambient temeprature levels. I learned from a search of related postings here that there is a fan for each channel. Does anybody know if it's practical to replace them? I bought this unit used over 10 years ago and it's served me well. I queried Adcom about this but they never replied. -- Charles Packer http://cpacker.org/whatnews mailboxATcpacker.org |
#2
Posted to rec.audio.high-end
|
|||
|
|||
Adcom cooling fan noise
On Sat, 27 Mar 2010 06:31:53 -0700, Charles Packer wrote
(in article ): The cooling fans in my Adcom GFA5800 are noisier than they were last year at similar ambient temeprature levels. I learned from a search of related postings here that there is a fan for each channel. Does anybody know if it's practical to replace them? I bought this unit used over 10 years ago and it's served me well. I queried Adcom about this but they never replied. -- Charles Packer http://cpacker.org/whatnews mailboxATcpacker.org Electronic cooling fans are commodity items and are made and sold by a myriad of manufacturers and distributors. The first thing you need to know is the size and physical configuration of the fan (diameter, size of the housing, mounting hole spacing, etc.) then you need to know the electrical requirements (AC or DC, and voltage). Often, you can get a manufacturer's name and model number off of the fan itself. This makes finding a replacement very easy. If it's a standard fan, then other manufacturers will likely cross-reference it. If the fans name and model number aren't on the fan, then more investigation is required. Most fans for equipment designed for domestic household applications run off of mains current (the power that comes out of the wall in your house). That means for the USA, that would be 120 V, 60Hz. But this isn't necessarily the case. Some run off of the DC power supply for the amplifier or off of low-voltage AC from a separate winding on the amplifier's power transformer. This is advantageous for the amp manufacturer because it allows them to use the same fans for all markets, regardless of that market's mains supply voltage. In other words, if the fans run on mains power, the manufacturer, when configuring their amp for say, the European market would not only have to wire the amplifier's power transformer for 220/240 volts 50 Hz, but use fans for that voltage level as well. By designing-in fans that run off of either a lower AC voltage from a secondary winding on the transformer, or a DC fan which was powered by the amp's power supply, the same fans can be used for all models in all markets because these voltages at these points in the circuit do not change from market to market. This means that only one fan model needs to be stocked, and fitted, thus reducing material cost and labor. So it is important to find out what the fan's voltage is and whether its a DC or an AC fan before looking for replacements on-line. Once you know what the fans are, it should be a simple matter to order them and replace them yourself. Most likely they run on house current, but you never know.... |
#3
Posted to rec.audio.high-end
|
|||
|
|||
Adcom cooling fan noise
you don't say what kind of noise - sometimes the fans pick up a lot of crud
and cleaning the blades can help - if it's bearing noise, try oiling the bearings, if it's a bushing type fan, check for free play, if there is much, replace fans "Charles Packer" wrote in message ... The cooling fans in my Adcom GFA5800 are noisier than they were last year at similar ambient temeprature levels. I learned from a search of related postings here that there is a fan for each channel. Does anybody know if it's practical to replace them? I bought this unit used over 10 years ago and it's served me well. I queried Adcom about this but they never replied. -- Charles Packer http://cpacker.org/whatnews mailboxATcpacker.org |
#4
Posted to rec.audio.high-end
|
|||
|
|||
Adcom cooling fan noise
On Mar 28, 12:40 am, "Bill Noble" wrote:
you don't say what kind of noise - sometimes the fans pick up a lot of crud The hum is louder than it has ever been before. The amp is quiet when first turned on, but as it warms up, and depending on the volume level of the program material, the hum of the fans emerge. I assume this is because the fans are thermostatically controlled. Oddly enough, the frequency of the hum is constant as it gets louder. If the fans' speed increased, I would expect the sound to increase in frequency as well, but they sound the same tone, which I'm guessing is 120 Hz. Anyway, on a recent warm evening after playing a symphony, the fan sound was irritatingly evident. -- Charles Packer http://cpacker.org/whatnews mailboxATcpacker.org |
#5
Posted to rec.audio.high-end
|
|||
|
|||
Adcom cooling fan noise
On 28 Mar 2010 18:11:03 GMT, Charles Packer wrote:
you don't say what kind of noise - sometimes the fans pick up a lot of crud The hum is louder than it has ever been before. The amp is quiet when first turned on, but as it warms up, and depending on the volume level of the program material, the hum of the fans emerge. I assume this is because the fans are thermostatically controlled. Oddly enough, the frequency of the hum is constant as it gets louder. If the fans' speed increased, I would expect the sound to increase in frequency as well, but they sound the same tone, which I'm guessing is 120 Hz. Anyway, on a recent warm evening after playing a symphony, the fan sound was irritatingly evident. Bad capacitors in the power supply? |
#6
Posted to rec.audio.high-end
|
|||
|
|||
Adcom cooling fan noise
"Ken" wrote in message
On 28 Mar 2010 18:11:03 GMT, Charles Packer wrote: you don't say what kind of noise - sometimes the fans pick up a lot of crud The hum is louder than it has ever been before. The amp is quiet when first turned on, but as it warms up, and depending on the volume level of the program material, the hum of the fans emerge. I assume this is because the fans are thermostatically controlled. Oddly enough, the frequency of the hum is constant as it gets louder. If the fans' speed increased, I would expect the sound to increase in frequency as well, but they sound the same tone, which I'm guessing is 120 Hz. Anyway, on a recent warm evening after playing a symphony, the fan sound was irritatingly evident. Bad capacitors in the power supply? Bias setting shifting, and current drain growing? There is a failure mode in fans where the bearing friction increases, and the current draw goes way up. Waaay up! I've seen a 12v CPU fan motor take out the 12 volt supply on a desktop PC. I saw this happen last week. Most of those PC power supplies can put out 12 amps or more at 12 volts. |
#7
Posted to rec.audio.high-end
|
|||
|
|||
Adcom cooling fan noise
On Mar 29, 6:57 pm, "Arny Krueger" wrote:
Bias setting shifting, and current drain growing? There is a failure mode in fans where the bearing friction increases, and the current draw goes way up. Waaay up! I've seen a 12v CPU fan motor take out the 12 volt supply on a desktop PC. I saw this happen last week. Most of those PC power supplies can put out 12 amps or more at 12 volts. Yikes, this would call for immediate investigation. I hope the fans are reasonably accessible when I lift out the 50-pound behemoth from its shelf and take off the covers. -- Charles Packer http://cpacker.org/whatnews mailboxATcpacker.org |
#8
Posted to rec.audio.high-end
|
|||
|
|||
Adcom cooling fan noise
"Charles Packer" wrote in message
On Mar 29, 6:57 pm, "Arny Krueger" wrote: Bias setting shifting, and current drain growing? There is a failure mode in fans where the bearing friction increases, and the current draw goes way up. Waaay up! I've seen a 12v CPU fan motor take out the 12 volt supply on a desktop PC. I saw this happen last week. Most of those PC power supplies can put out 12 amps or more at 12 volts. Yikes, this would call for immediate investigation. I hope the fans are reasonably accessible when I lift out the 50-pound behemoth from its shelf and take off the covers. If the existing fans run on 12 volts DC, the larger PC parts retailers like Newegg have many options for attractive prices. |
#9
Posted to rec.audio.high-end
|
|||
|
|||
Adcom cooling fan noise -- it was dust!
On Mar 27, 9:31 am, Charles Packer wrote:
The cooling fans in my Adcom GFA5800 are noisier than they were last year at similar ambient temeprature levels. After I removed the top plate and front panel, I could see that it would be too difficult to replace the noisy right-channel fan in the time I had at my disposal, so I went to put it all back together to wait until next weekend. But first I vacuumed out 10 years worth of dust bunnies clinging to the fan housings. That did it! Now I can barely hear the fans purring. -- Charles Packer http://cpacker.org/whatnews mailboxATcpacker.org |
#10
|
|||
|
|||
Quote:
|
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FA: Acurus pre amp, Adcom 555 II, Adcom GFP-550, NO RESERVES | Marketplace | |||
Help W/Cooling Fans | Pro Audio | |||
Best Cooling Fan | Vacuum Tubes | |||
Need 2" silent cooling fan | Pro Audio | |||
cooling fan for guitar amp | Tech |