Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.pro
Tatonik Tatonik is offline
external usenet poster
 
Posts: 23
Default Anything to say on Speakons


I'm planning on terminating some speaker cables with Speakon connectors.
I've plugged in Speakons a few times, but never built any cables with
them. In addition to the Neutrik brand, I noticed Amphenol has their
own version (slightly more expensive). Is there any reason to pick one
over the other (or any other brand I don't know about), in regard to
quality or ease of wiring or general use?

I'm surprised this style of connector hasn't caught on in high-end home
audio. The basic design seems so much safer and more secure than
anything else I've encountered.

  #2   Report Post  
Posted to rec.audio.pro
[email protected] thekmanrocks@gmail.com is offline
external usenet poster
 
Posts: 1,742
Default Anything to say on Speakons

I broke one over twenty years ago while teching at a local hotel
and conference center.
  #3   Report Post  
Posted to rec.audio.pro
Scott Dorsey Scott Dorsey is offline
external usenet poster
 
Posts: 16,853
Default Anything to say on Speakons

Tatonik wrote:
I'm planning on terminating some speaker cables with Speakon connectors.
I've plugged in Speakons a few times, but never built any cables with
them. In addition to the Neutrik brand, I noticed Amphenol has their
own version (slightly more expensive). Is there any reason to pick one
over the other (or any other brand I don't know about), in regard to
quality or ease of wiring or general use?


They are all fine. Neutrik will sell you some with metal bodies that are
more expensive but can stand a truck driving over them at a festival. I
tend to like those. Use the NL4, not the NL2, because nobody uses the NL2
and you won't be compatible with anyone else.

The Amphenols are fine. There are some cheap Chinese knockoffs also and
those aren't very rugged at all but you get what you pay for. They are
functional and cheap.

I'm surprised this style of connector hasn't caught on in high-end home
audio. The basic design seems so much safer and more secure than
anything else I've encountered.


High end people don't want secure and reliable, they want options for
tweaking.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
  #4   Report Post  
Posted to rec.audio.pro
John Williamson John Williamson is offline
external usenet poster
 
Posts: 1,753
Default Anything to say on Speakons

On 19/07/2020 00:33, Scott Dorsey wrote:

High end people don't want secure and reliable, they want options for
tweaking


I suspect a lot of them also want something they can see the workings of.

Pro audio people just want something they can plug in and will work well
enough for the purpose. Speakons and XLR using decent quality cable are
good at that, and it's easy to swap stuff round when you are out on
location or when a perforner moves round a studio.

Audiophiles don't trust what they can't see and fiddle with.

There is also the way the professionals alter the setup between jobs,
while a high end home audio person will want to set stuff up once and
for all, so the convenience of a Speakon isn't needed. Just bear in mind
very few of them even run line level audio through balanced leads...


--
Tciao for Now!

John.
  #5   Report Post  
Posted to rec.audio.pro
geoff geoff is offline
external usenet poster
 
Posts: 1,812
Default Anything to say on Speakons

On 21/07/2020 2:13 am, John Williamson wrote:

while a high end home audio person will want to set stuff up once and
for all, so the convenience of a Speakon isn't needed. Just bear in mind
very few of them even run line level audio through balanced leads...



Something to be iad for unbal though. One lot of line-driver distortion
rather than that of two devices.

geoff


  #6   Report Post  
Posted to rec.audio.pro
geoff geoff is offline
external usenet poster
 
Posts: 1,812
Default Anything to say on Speakons

On 21/07/2020 8:45 am, geoff wrote:
On 21/07/2020 2:13 am, John Williamson wrote:

while a high end home audio person will want to set stuff up once and
for all, so the convenience of a Speakon isn't needed. Just bear in
mind very few of them even run line level audio through balanced leads...



Something to be iad for unbal though. One lot of line-driver distortion
rather than that of two devices.

geoff


Ooops "iad" = "said".

g.

  #7   Report Post  
Posted to rec.audio.pro
John Williamson John Williamson is offline
external usenet poster
 
Posts: 1,753
Default Anything to say on Speakons

On 21/07/2020 00:52, geoff wrote:
On 21/07/2020 8:45 am, geoff wrote:
On 21/07/2020 2:13 am, John Williamson wrote:

while a high end home audio person will want to set stuff up once and
for all, so the convenience of a Speakon isn't needed. Just bear in
mind very few of them even run line level audio through balanced
leads...



Something to be iad for unbal though. One lot of line-driver
distortion rather than that of two devices.

geoff


Ooops "iad" = "said".

I got that, but the use of a balanced line reduces other problems, and
line driver distortion now is as close as makes no difference to zero.
Balanced lines at 600 ohm impedance are long established, very mature
technology. In some circumstances, a transformer is used as a special
effect to get that "warm", distorted, "analogue" sound. Even digital
signal transmission benefits from being balanced (or optical) if the
line is long, as it means the error correction is easier to do.

Unbalanced's only benefit is that it is (much) cheaper to make.

For professionals, the advantage of balanced signal connections is that
we can connect any pair of balanced items together, and it all "just
works", even over long connections (I use 25 metre microphone leads,
often with a couple of joints in them, for instance, running parallel to
a line level return in the same loom. Some on here have mentioned using
microphone leads a quarter of a mile long with no major problems.). The
only noticeable distortion is from the diaphragms inside the microphones
and monitors. Using that length of connection on an unbalanced wire only
needs someone to turn a fluorescent light on in a nearby room, and you
have interference on the signal, and as for cellphones...

The circuitry inside most professional equipment is generally balanced
all the way through, so there is no place where the circuit is unbalanced.


--
Tciao for Now!

John.
  #8   Report Post  
Posted to rec.audio.pro
Phil Allison[_4_] Phil Allison[_4_] is offline
external usenet poster
 
Posts: 499
Default Anything to say on Speakons

John Williamson wrote:

======================


High end people don't want secure and reliable, they want options for
tweaking


I suspect a lot of them also want something they can see the workings of.

Pro audio people just want something they can plug in and will work well
enough for the purpose. Speakons and XLR using decent quality cable are
good at that, and it's easy to swap stuff round when you are out on
location or when a perforner moves round a studio.

Audiophiles don't trust what they can't see and fiddle with.


** The real reason is much simpler:

Pro audio amplifiers were once always fitted with 4mmm speaker terminals and 1/4 inch jacks plus XLR inputs. Then Speakons came along and were heavily marketed in that sphere - so folk started fitted them to speaker boxes in lieu of XLRs. Having 4 conductor links was much appreciated. Amp racks were often fitted up too.

Took a couple of decades, but now all such amps have Speakons fitted at the factory and also speaker boxes as is expected by buyers and installers.

No such thing applies to domestic hi-fi - few owners would even know what a Speakon connector was or looked like so no change is foreseen by anyone.


...... Phil

  #9   Report Post  
Posted to rec.audio.pro
Phil Allison[_4_] Phil Allison[_4_] is offline
external usenet poster
 
Posts: 499
Default Anything to say on Speakons

Tatonik wrote:

=============

I'm planning on terminating some speaker cables with Speakon connectors.
I've plugged in Speakons a few times, but never built any cables with
them. In addition to the Neutrik brand, I noticed Amphenol has their
own version (slightly more expensive). Is there any reason to pick one
over the other (or any other brand I don't know about), in regard to
quality or ease of wiring or general use?


** Speakons are cool connectors, I use them on my home stereo 3-way speakers. The cable clamping is very good and terminating cable ends is simple and requires no soldering.

Dunno about the Amphenol version but BEWARE of Chinese clones - with just a little wear they can FAIL to connect at all.


I'm surprised this style of connector hasn't caught on in high-end home
audio. The basic design seems so much safer and more secure than
anything else I've encountered.


** Nor have XLRs - chunky gold plated binding posts and matching 4mm plugs seem to be the only ones used. Horribly prone to short circuiting during handling IME. Same thing is near impossible with Speakons.


..... Phil



  #10   Report Post  
Posted to rec.audio.pro
Les Cargill[_5_] Les Cargill[_5_] is offline
external usenet poster
 
Posts: 44
Default Anything to say on Speakons

Tatonik wrote:

I'm planning on terminating some speaker cables with Speakon connectors.
Â*I've plugged in Speakons a few times, but never built any cables with
them.Â* In addition to the Neutrik brand, I noticed Amphenol has their
own version (slightly more expensive).Â* Is there any reason to pick one
over the other (or any other brand I don't know about), in regard to
quality or ease of wiring or general use?

I'm surprised this style of connector hasn't caught on in high-end home
audio.Â* The basic design seems so much safer and more secure than
anything else I've encountered.


Speakons all but preclude daisy-chaining unless it's provided for on the
panel ( or you make a box ). That's the only real downside and it might
be that big of one.

--
Les Cargill


  #11   Report Post  
Posted to rec.audio.pro
geoff geoff is offline
external usenet poster
 
Posts: 1,812
Default Anything to say on Speakons

On 22/07/2020 9:44 am, Les Cargill wrote:
Tatonik wrote:

I'm planning on terminating some speaker cables with Speakon
connectors. Â*Â*I've plugged in Speakons a few times, but never built
any cables with them.Â* In addition to the Neutrik brand, I noticed
Amphenol has their own version (slightly more expensive).Â* Is there
any reason to pick one over the other (or any other brand I don't know
about), in regard to quality or ease of wiring or general use?

I'm surprised this style of connector hasn't caught on in high-end
home audio.Â* The basic design seems so much safer and more secure than
anything else I've encountered.


Speakons all but preclude daisy-chaining unless it's provided for on the
panel ( or you make a box ). That's the only real downside and it might
be that big of one.


Why should that be any more difficult for daisy-chaining than XLR
female/male or jack ins/outs on a speaker, which are usually 'panel'
anyway ?

geoff
  #12   Report Post  
Posted to rec.audio.pro
Scott Dorsey Scott Dorsey is offline
external usenet poster
 
Posts: 16,853
Default Anything to say on Speakons

geoff wrote:
Why should that be any more difficult for daisy-chaining than XLR
female/male or jack ins/outs on a speaker, which are usually 'panel'
anyway ?


You can't daisy-chain XLRs, 1/4 phone, Socapex, or Canon P connectors either,
all of which are popular for speakers.

But you can daisy-chain banana plugs and spade terminals.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
  #13   Report Post  
Posted to rec.audio.pro
geoff geoff is offline
external usenet poster
 
Posts: 1,812
Default Anything to say on Speakons

On 22/07/2020 1:43 pm, Scott Dorsey wrote:
geoff wrote:
Why should that be any more difficult for daisy-chaining than XLR
female/male or jack ins/outs on a speaker, which are usually 'panel'
anyway ?


You can't daisy-chain XLRs, 1/4 phone, Socapex, or Canon P connectors either,
all of which are popular for speakers.

But you can daisy-chain banana plugs and spade terminals.
--scott


I though the qualification 'panel' implied parallel connectors mounted
on a panel (or chassis, or whatever), in which case a doddle for any
connector.

Just don't hang too much cable-weight on those piggy-backed bananas !

geoff
  #14   Report Post  
Posted to rec.audio.pro
Les Cargill[_5_] Les Cargill[_5_] is offline
external usenet poster
 
Posts: 44
Default Anything to say on Speakons

geoff wrote:
On 22/07/2020 1:43 pm, Scott Dorsey wrote:
geoffÂ* wrote:
Why should that be any more difficult for daisy-chaining than XLR
female/male or jack ins/outs on a speaker, which are usually 'panel'
anyway ?


You can't daisy-chain XLRs, 1/4 phone, Socapex, or Canon P connectors
either,
all of which are popular for speakers.

But you can daisy-chain banana plugs and spade terminals.
--scott


I though the qualification 'panel' implied parallel connectors mounted
on a panel (or chassis, or whatever), in which case a doddle for any
connector.


It did.

For some reason, every MI grade PA or bass guitar box ever made had two
1/4" jacks to enable daisy-chaining. I can think of no examples with
Speakon, probably because of panel real estate.

A time-honored way to set up especially a bass rig is to use a pair of 8
ohm boxes in parallel driven by a 4 ohm amp.

Not an issue with controlled configurations where you want things to
hook up only one way and can spend some engineering making it that way.

Just don't hang too much cable-weight on those piggy-backed bananas !


I've never used those in anger.

geoff


--
Les Cargill
  #15   Report Post  
Posted to rec.audio.pro
Trevor Trevor is offline
external usenet poster
 
Posts: 2,820
Default Anything to say on Speakons

On 22/07/2020 12:26 pm, geoff wrote:
On 22/07/2020 1:43 pm, Scott Dorsey wrote:
geoffÂ* wrote:
Why should that be any more difficult for daisy-chaining than XLR
female/male or jack ins/outs on a speaker, which are usually 'panel'
anyway ?


You can't daisy-chain XLRs, 1/4 phone, Socapex, or Canon P connectors
either,
all of which are popular for speakers.

But you can daisy-chain banana plugs and spade terminals.


I though the qualification 'panel' implied parallel connectors mounted
on a panel (or chassis, or whatever), in which case a doddle for any
connector.

Just don't hang too much cable-weight on those piggy-backed bananas !



Yes, much prefer Speakon in and out on every speaker. Banana plugs
barely adequate for heavy speaker cable when NOT piggy backed!




  #16   Report Post  
Posted to rec.audio.pro
Phil Allison[_4_] Phil Allison[_4_] is offline
external usenet poster
 
Posts: 499
Default Anything to say on Speakons

Scott Dorsey wrote:

====================


You can't daisy-chain XLRs, 1/4 phone, Socapex, or Canon P
connectors either, all of which are popular for speakers.


To "daisy chain" speakers only requires each box to have two sockets wired in parallel. The type of connector is NOT relevant.

Mic leads can be directly used as extensions - but speaker leads cannot without an "joiner" box.

Bewa Cargill is totally clueless.



...... Phil












But you can daisy-chain banana plugs and spade terminals.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."


  #17   Report Post  
Posted to rec.audio.pro
Mike Rivers[_2_] Mike Rivers[_2_] is offline
external usenet poster
 
Posts: 2,190
Default Anything to say on Speakons

On 7/21/2020 9:43 PM, Scott Dorsey wrote:
You can't daisy-chain XLRs, 1/4 phone, Socapex, or Canon P connectors either,
all of which are popular for speakers.

But you can daisy-chain banana plugs and spade terminals.


What variety of daisy are you talking about here? Of course you can
daily-chain common XLR cables with a male on one end and another. What
you can't do is connect something in parallel without some special
arrangements, either a Y adapter or a speaker that's built for
daisy-chaining to another speaker, with a parallel-connected
opposite-gender XLR added to the connector panel.

Of course you can stack banana plugs as long as they have a "stacking"
hole in them. But that isn't universal.



--
For a good time, call http://mikeriversaudio.wordpress.com
  #18   Report Post  
Posted to rec.audio.pro
Adrian Tuddenham[_2_] Adrian Tuddenham[_2_] is offline
external usenet poster
 
Posts: 505
Default Anything to say on Speakons

Mike Rivers wrote:

On 7/21/2020 9:43 PM, Scott Dorsey wrote: You can't daisy-chain XLRs,
1/4 phone, Socapex, or Canon P connectors either, all of which are
popular for speakers.
But you can daisy-chain banana plugs and spade terminals.


Of course you can stack banana plugs as long as they have a "stacking"
hole in them. But that isn't universal.


I use banana plugs for all my P.A. speakers. Every speaker has three
sets of sockets in parallel so that an incoming signal can be fed
onwards to at least two more units. The entire system is standardised
on 100v line, so everything is in parallel and impedance matching
becomes a non-concept (as long as the amplifier can handle the total
load).

The inclusion of a tapped transformer in each loudspeaker unit allows
balancing of sound levels and I have an auto-transformer that can be
used to reduce the level to a whole group of speakers simultaneously.
Ordinary switches on a plastic box with banana sockets at the back can
be used to switch groups of speakers in or out.

The whole system is extremely versatile and adaptable to almost any
small to medium-sized outdoor event. Some of these smaller events are
sketchily planned, so the ability to re-rig in response to some
unforseen circumstance while the event is in progress can be a
life-saver. The system has also coped reasonably adequately with the
sort of small and medium-sized indoor music events where it is mainly
needed for sound reinforcement.


--
~ Adrian Tuddenham ~
(Remove the ".invalid"s and add ".co.uk" to reply)
www.poppyrecords.co.uk
  #19   Report Post  
Posted to rec.audio.pro
Les Cargill[_5_] Les Cargill[_5_] is offline
external usenet poster
 
Posts: 44
Default Anything to say on Speakons

Scott Dorsey wrote:
geoff wrote:
Why should that be any more difficult for daisy-chaining than XLR
female/male or jack ins/outs on a speaker, which are usually 'panel'
anyway ?


You can't daisy-chain XLRs, 1/4 phone, Socapex, or Canon P connectors either,
all of which are popular for speakers.


Seems like every MI grade box made with 1/4" panels had two jacks in
parallel.

But you can daisy-chain banana plugs and spade terminals.
--scott


--
Les Cargill
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT +1. The time now is 10:16 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"