Home |
Search |
Today's Posts |
#1
|
|||
|
|||
2033 valve specs
I am looking for the specs on the above number. I have looked and not
found anything on the net and nothing is in my manuals. Does anyone have the specs on this number? Thanks. Mark |
#2
|
|||
|
|||
|
#3
|
|||
|
|||
Sander deWaal wrote in message . ..
(Mark) said: I am looking for the specs on the above number. I have looked and not found anything on the net and nothing is in my manuals. Does anyone have the specs on this number? Thanks. A mystery tube. Nothing in Babani, AVO, RTT, MK tube handbook, Essential Characteristics, Frank's page. Nothing! Are you sure this isn't a production run number? What else is on there? What does it look like, inside and out? Base? I do not know if it was a production number. I do know it is listed in the Antique catalogue and a few people have them for sale on the internet. From what one seller said, it is a signal triode with a 7-pin minature base with a heater voltage of 6,3 volts. What I have told you is all I have been able to find out. I may have attempt to get the specs by testing parameters. |
#5
|
|||
|
|||
Sander deWaal wrote in message . ..
(Mark) said: I am looking for the specs on the above number. I have looked and not found anything on the net and nothing is in my manuals. Does anyone have the specs on this number? Thanks. A mystery tube. Nothing in Babani, AVO, RTT, MK tube handbook, Essential Characteristics, Frank's page. Nothing! Are you sure this isn't a production run number? What else is on there? What does it look like, inside and out? Base? I made a mistake on the inside of the valve. It is a dual triode like a 6J6 but does not look like one with the plates in the same arrangement. |
#6
|
|||
|
|||
|
#7
|
|||
|
|||
Could also be something like a 3A5 ??
If so , watch the U-ff !! "Sander deWaal" schreef in bericht ... (Mark) said: I made a mistake on the inside of the valve. It is a dual triode like a 6J6 but does not look like one with the plates in the same arrangement. So it could be something like 12DW7 or so, but with probably common cathodes. I'm afraid you'll have to do some measuring :-) -- Sander deWaal "SOA of a KT88? Sufficient." |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Linkwitz' Orion design | High End Audio | |||
FS: Steiner 2-Voice Synthacon, Steiner EVI Electronic Valve Instrument and Steiner Microcon Synthesizer | Pro Audio | |||
FS: Steiner 2-Voice Synthacon, Steiner EVI Electronic Valve Instrument and Steiner Microcon Synthesizer | Pro Audio | |||
WANTED: Info or Specs for KLH model Thirty-One Speakers ? | Marketplace | |||
MTX Woofer Specs | Car Audio |